freelanderspecialist.com

xsport · 1st August 2016, 15:56

anyone heard of or had dealings with these people ? their website is interesting but like with all rebuilders you dont know what you will get until you get it !! im still weighing up my options in my quest to find a low miles well serviced kv6 2.5 engine.they seem to offer a rebuild for the units that were the same as the kv6 rover 75. anyone used these people ?

Monty Hotspur · 1st August 2016, 16:42

I'd hang on for a moment, I think I know something about this lot.

xsport · 1st August 2016, 16:51

i hope im reading this right .... !!

Monty Hotspur · 1st August 2016, 16:56

The name of the company rang a little alarm bell in my head but this thread over on LandyZone clears up the confusion.

https://www.landyzone.co.uk/land-rov.../#post-2720981

Basically there was an outfit with a similar name in nearby Kings Lynn who were about as trustworthy as George Mackmurdie of Knight Industries infamy. It seems though that the company you are looking at do have some recommendations so it looks okay to see if they can help you.

xsport · 1st August 2016, 17:06

Quote:

Originally Posted by Monty Hotspur

The name of the company rang a little alarm bell in my head but this thread over on LandyZone clears up the confusion.

https://www.landyzone.co.uk/land-rov.../#post-2720981

Basically there was an outfit with a similar name in nearby Kings Lynn who were about as trustworthy as George Mackmurdie of Knight Industries infamy. It seems though that the company you are looking at do have some recommendations so it looks okay to see if they can help you.

yes i see what you are saying and im gratefull for your post ... thankyou. im still a little sceptical as the recommendation came from a parts supplier so would not really expect otherwise.but thanks again for your post. cheers.

Monty Hotspur · 1st August 2016, 17:07

BTW there are a couple of minor differences between the KV6 used in the Hippo and the 75. Oil filter was one I recall and I think the sump is deeper for the LR version.

xsport · 1st August 2016, 17:36

yes i understand but im thinking more of the rebuild service that they offer for the kv6.so not a problem. its just that there are not many people that can do a decent rebuild around.not even on this website.that would last anyhow.lots try and succeed but long term durability is the goal but sadly too many spend loads of money only to find its been wasted further down the line. you need experience with these engines ... but that sadly comes at a premium cost as many have found out. thanks.

heli flyer · 1st August 2016, 18:21

Well, I for one hope all is OK with freelander specialists. com as my 190se is with them as I type! I'll let you know how I get on

xsport · 1st August 2016, 19:16

Quote:

Originally Posted by heli flyer

Well, I for one hope all is OK with freelander specialists. com as my 190se is with them as I type! I'll let you know how I get on

wow !!! you are a brave man.even my knees are trembleing ..... no seriously i sincerely hope all is ok. can i ask if your in for engine rebuild or transplant recon or gearbox ? this post will be of great importance to follow for all kv6 owners as we now find these engines hard to come across with a known history. can we ask you to report back on your findings its of much interest to me and probably many others. good luck.

heli flyer · 1st August 2016, 21:59

Hi xsport, mine is in for an engine rebuild (finally had to admit one or both head gaskets have given up the struggle) I chose them after I had a chat with them and read the reviews. And they are less than 20 miles away! I have yet to find out what the (expensive) problem is so I will certainly keep everyone posted. Wish me luck!

1st August 2016, 15:56	#1
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,741 Thanks: 358 Thanked 419 Times in 310 Posts	freelanderspecialist.com anyone heard of or had dealings with these people ? their website is interesting but like with all rebuilders you dont know what you will get until you get it !! im still weighing up my options in my quest to find a low miles well serviced kv6 2.5 engine.they seem to offer a rebuild for the units that were the same as the kv6 rover 75. anyone used these people ?

1st August 2016, 16:42	#2
Monty Hotspur Avid contributor Rover 75 Saloon Join Date: Dec 2015 Location: Berkshire Posts: 110 Thanks: 3 Thanked 24 Times in 22 Posts	I'd hang on for a moment, I think I know something about this lot.

1st August 2016, 16:51	#3
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,741 Thanks: 358 Thanked 419 Times in 310 Posts	i hope im reading this right .... !!

1st August 2016, 16:56	#4
Monty Hotspur Avid contributor Rover 75 Saloon Join Date: Dec 2015 Location: Berkshire Posts: 110 Thanks: 3 Thanked 24 Times in 22 Posts	The name of the company rang a little alarm bell in my head but this thread over on LandyZone clears up the confusion. https://www.landyzone.co.uk/land-rov.../#post-2720981 Basically there was an outfit with a similar name in nearby Kings Lynn who were about as trustworthy as George Mackmurdie of Knight Industries infamy. It seems though that the company you are looking at do have some recommendations so it looks okay to see if they can help you.

1st August 2016, 17:07	#6
Monty Hotspur Avid contributor Rover 75 Saloon Join Date: Dec 2015 Location: Berkshire Posts: 110 Thanks: 3 Thanked 24 Times in 22 Posts	BTW there are a couple of minor differences between the KV6 used in the Hippo and the 75. Oil filter was one I recall and I think the sump is deeper for the LR version.

1st August 2016, 17:36	#7
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,741 Thanks: 358 Thanked 419 Times in 310 Posts	yes i understand but im thinking more of the rebuild service that they offer for the kv6.so not a problem. its just that there are not many people that can do a decent rebuild around.not even on this website.that would last anyhow.lots try and succeed but long term durability is the goal but sadly too many spend loads of money only to find its been wasted further down the line. you need experience with these engines ... but that sadly comes at a premium cost as many have found out. thanks.

1st August 2016, 18:21	#8
heli flyer Avid contributor MG ZT 190SE Join Date: Jan 2010 Location: kings lynn Posts: 112 Thanks: 5 Thanked 20 Times in 12 Posts	Well, I for one hope all is OK with freelander specialists. com as my 190se is with them as I type! I'll let you know how I get on

1st August 2016, 21:59	#10
heli flyer Avid contributor MG ZT 190SE Join Date: Jan 2010 Location: kings lynn Posts: 112 Thanks: 5 Thanked 20 Times in 12 Posts	Hi xsport, mine is in for an engine rebuild (finally had to admit one or both head gaskets have given up the struggle) I chose them after I had a chat with them and read the reviews. And they are less than 20 miles away! I have yet to find out what the (expensive) problem is so I will certainly keep everyone posted. Wish me luck!