|
||
|
8th April 2009, 21:19 | #1 |
Gets stuck in
MGZT-T Join Date: Aug 2007
Location: Bournemouth
Posts: 578
Thanks: 7
Thanked 27 Times in 24 Posts
|
Fitting a headlamp washer pump
Looking at the washer bottle on my Facelift ZT-T, it looks like I just need to remove a disk in the bottle to make a hole for a headlamp washer pump. All the other features are there. But I could not see an electrical connector.
Does anyone know if I need a new piece of harness, or is the connector tucked-up out of the way somewhere? Bill C |
8th April 2009, 21:22 | #2 |
Banned
75 CDT Connoisseur SE Auto Join Date: Nov 2006
Location: Wolverhampton
Posts: 8,450
Thanks: 0
Thanked 3 Times in 3 Posts
|
In the case of VeeKay, the whole cable assembly was already fitted and the connector was taped back in the loom.
|
8th April 2009, 21:47 | #3 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
Not there on most of the facelifts I'm afraid.
|
8th April 2009, 21:51 | #4 |
Gets stuck in
MGZT-T Join Date: Aug 2007
Location: Bournemouth
Posts: 578
Thanks: 7
Thanked 27 Times in 24 Posts
|
Looks like the same situation with the heated screen wash kit (and cubby-hole torch). I had a really good look for the connectors, but they were not there.
Maybe I need to add a set of live connections switched by the ignition to power these other devices. Bill |
|
|