|
||
|
20th June 2017, 22:18 | #1 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,618
Thanks: 385
Thanked 552 Times in 328 Posts
|
Power steering pipe
I noticed that the low pressure power steering pipe has rubbed on the crank pulley at some point. Quite a large chunk missing, although it's not leaking.
My local garage said, just cut it out and join the pipe together with a section of copper pipe and clips. They said there is very little pressure in low pressure pipe. Good idea? or is there a better way?
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
21st June 2017, 09:12 | #2 | |
This is my second home
Rover 75 Saloon Join Date: Aug 2007
Location: Avignon
Posts: 4,466
Thanks: 94
Thanked 661 Times in 554 Posts
|
Quote:
Just after a clutch repair |
|
21st June 2017, 09:53 | #3 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,618
Thanks: 385
Thanked 552 Times in 328 Posts
|
thanks! it kind of made sense as the fittings are the push on variety
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
21st June 2017, 10:15 | #4 |
Posted a thing or two
Mk1 ZT 190 - Mk2 ZS 180 - Mercedes E63 AMG S - Ford Ranger Hawk Join Date: Mar 2016
Location: Middlesbrough
Posts: 1,456
Thanks: 123
Thanked 409 Times in 281 Posts
|
That will work just fine, there literally is a few PSI of pressure on the low side as its basically just a return.
It will stay spray out if you nick it but it doesnt require any special fitting, jubiliee be fine. Just make sure the pipe replaced is the same diameter or you'll cause a pressure point.
__________________
http://i66.tinypic.com/5cd6xj.jpg |
21st June 2017, 13:42 | #5 |
This is my second home
Rover 75 Saloon Join Date: Aug 2007
Location: Avignon
Posts: 4,466
Thanks: 94
Thanked 661 Times in 554 Posts
|
|
21st June 2017, 23:05 | #6 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,618
Thanks: 385
Thanked 552 Times in 328 Posts
|
thanks, i will do that with it.
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
Thread Tools | |
Display Modes | |
|
|