WANTED URGENTLY: 2.5 V6 camshafts (not ZT 190/180 auto), complete set of 4

Bolin · 18th June 2017, 12:53

URGENTLY WANTED

Complete set of 4 camshafts for a 2.5 KV6 - 2 inlet and 2 exhaust.

Must be from Rover 75 2.5 manual or auto or MG ZT 2.5 160.

Camshafts from an MG ZS 180 & Land Rover Freelander Mk1 2.5 V6 should also be the same.

Camshafts from MG ZT 190/180 auto models are not the same.

It may help to confirm the part nos of the camshafts, which is cast and punched onto them, so I can check the are the correct ones.

The camshafts must be in excellent condition with absolutely no pitting or scoring or worn lobes - running a fingernail along the tip of the lobe is a good way to feel the first signs of wear, which might be very difficult to see.

If you can help, please let me know ASAP. Thanks.

Haggle63 · 22nd June 2017, 17:48

Hi I have acquired a Rover 75 V6 2.5 with just over 124k on the clock.
The car was hit from behind.
The engine was running sweet as a nut, so I had the inlet manifold off it.

You are welcome to help yourself to any bits you want.

Cheers

Rob
In Rainham. Kent.

Bolin · 22nd June 2017, 23:44

Hi Rob

Many thanks for the offer, but I have already sourced and fitted the camshafts - so I am all sorted now.

Thanks again, Bolin

18th June 2017, 12:53	#1
Bolin This is my second home Rover 75 2.5 V6 Connoisseur SE 4dr manual Wedgewood Blue 2 04-05/06/2001 Join Date: Nov 2006 Location: N.E. Hampshire Posts: 4,617 Thanks: 289 Thanked 308 Times in 243 Posts	WANTED URGENTLY: 2.5 V6 camshafts (not ZT 190/180 auto), complete set of 4 URGENTLY WANTED Complete set of 4 camshafts for a 2.5 KV6 - 2 inlet and 2 exhaust. Must be from Rover 75 2.5 manual or auto or MG ZT 2.5 160. Camshafts from an MG ZS 180 & Land Rover Freelander Mk1 2.5 V6 should also be the same. Camshafts from MG ZT 190/180 auto models are not the same. It may help to confirm the part nos of the camshafts, which is cast and punched onto them, so I can check the are the correct ones. The camshafts must be in excellent condition with absolutely no pitting or scoring or worn lobes - running a fingernail along the tip of the lobe is a good way to feel the first signs of wear, which might be very difficult to see. If you can help, please let me know ASAP. Thanks. __________________ "...the new Rover 75, which is a fabulous car......I think it looks fabulous....It's like sitting in a Rolls Royce......For me, this is the star of the show.....it looks so good" - J. Clarkson, motoring journalist on the launch of the Rover 75 in 1998.

22nd June 2017, 17:48	#2
Haggle63 Regular poster Rover 75 Saloon Join Date: Apr 2017 Location: Rainham Posts: 66 Thanks: 47 Thanked 3 Times in 3 Posts	Rover 75 V6 2.5 sitting on my drive. Hi I have acquired a Rover 75 V6 2.5 with just over 124k on the clock. The car was hit from behind. The engine was running sweet as a nut, so I had the inlet manifold off it. You are welcome to help yourself to any bits you want. Cheers Rob In Rainham. Kent.

22nd June 2017, 23:44	#3
Bolin This is my second home Rover 75 2.5 V6 Connoisseur SE 4dr manual Wedgewood Blue 2 04-05/06/2001 Join Date: Nov 2006 Location: N.E. Hampshire Posts: 4,617 Thanks: 289 Thanked 308 Times in 243 Posts	Hi Rob Many thanks for the offer, but I have already sourced and fitted the camshafts - so I am all sorted now. Thanks again, Bolin __________________ "...the new Rover 75, which is a fabulous car......I think it looks fabulous....It's like sitting in a Rolls Royce......For me, this is the star of the show.....it looks so good" - J. Clarkson, motoring journalist on the launch of the Rover 75 in 1998.