|
||
|
|
28th January 2019, 17:09 | #1 |
Newbie
Rover 75 Join Date: Feb 2011
Location: Luxembourg
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
|
Need help with adapter for 9 inch radio
Hi,
I just bought this item (https://www.ebay.fr/itm/Car-Stereo-G...53.m2749.l2649) I don't have the good adapter, this is what my car have: this is what i get in the box: After looking on the web (and on this forum), i have looked the Xtrons site. But i don't see any adapter that my help me to plug it. Before buying any bad adapter, i need your help ! (i have an old adapter from an old WINCE device with the good adapter, i'm thinking about get out the wires and use it on the bad adapter. If someone know how to wire it ?) Thanks ! |
28th January 2019, 18:50 | #2 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,921
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Those ISO connectors on your car should plug straight into the back of your new stereo
|
28th January 2019, 19:04 | #3 |
Newbie
Rover 75 Join Date: Feb 2011
Location: Luxembourg
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
|
|
28th January 2019, 19:30 | #4 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,921
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Just swap them over on the radio side, reverse +ve, very common. Causes the windscreen wiper to come on when you turn the radio off
|
28th January 2019, 21:34 | #5 |
Newbie
Rover 75 Join Date: Feb 2011
Location: Luxembourg
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
|
Just tested, it will definitely not work, because the shape is not the same (90° rotated)
So i need an adapter or rewired with the plug of my old device (which have the good shape) |
28th January 2019, 22:39 | #6 |
This is my second home
1979 Capri 1.6L, 1982 Capri 1.6L, 2016 Dacia Stepway Join Date: Jun 2009
Location: Dorset
Posts: 8,595
Thanks: 3,496
Thanked 3,397 Times in 2,218 Posts
|
From what I can make out from your photos, you can cut off the double ISO plug from old WinCE harness (pic 3). Then cut off the large black 40 pin plug from harness that came with new stereo (pic 2) and join wires together in colour order using bullet connectors.
One ISO plug is for speakers (8x wires), and the other is power/ground (red, yellow, black etc). Now cut off red plug from your old WinCE loom (pic 3) these are the steering wheel controls. Use the two wires coming from red plug and connect to the two SWC wires coming out of new stereo harness (SWC from new stereo will be labelled either on stereo or in instruction manual). You should end up with new stereo harness having the double ISO plug from old WinCE (power & speakers), and the red ISO plug with the two SWC wires (green & black) connected. Your car harness grey and brown ISO (pic 1) plugs into double ISO connector, and your blue/green/yellow plugs into red ISO connector. |
|
|