|
||
|
||
|
![]() |
#1 |
Newbie
Rover 75 Join Date: Nov 2012
Location: Ballinamore
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() I just noticed i was losing coolant below the exhaust manifold so checked coolant and yes have little bits of gunk floating around, so what do i do now, is it worth fixing and how much would it cost
![]() |
![]() |
![]() |
![]() |
#2 |
Posted a thing or two
ex. MG ZT+ Join Date: May 2013
Location: Northampton-ish
Posts: 1,484
Thanks: 156
Thanked 98 Times in 95 Posts
|
![]() A proper repair should be less than £400. It's a good idea to sort it sooner rather than later.
__________________
'03 MG ZT+ 1.8T X-Power Grey with Monogram 'WTD' black alcantara trim. [SIGPIC][/SIGPIC] My project thread HERE ![]() |
![]() |
![]() |
![]() |
#3 |
Newbie
Rover 75 Join Date: Nov 2012
Location: Ballinamore
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() thanx for getting back and what sort of Gasket should i get.
|
![]() |
![]() |
![]() |
#4 | |
Posted a thing or two
ex. MG ZT+ Join Date: May 2013
Location: Northampton-ish
Posts: 1,484
Thanks: 156
Thanked 98 Times in 95 Posts
|
![]() Quote:
I would tend towards the latest blue Payen elastomer gasket over an MLS.
__________________
'03 MG ZT+ 1.8T X-Power Grey with Monogram 'WTD' black alcantara trim. [SIGPIC][/SIGPIC] My project thread HERE ![]() |
|
![]() |
![]() |
![]() |
#5 |
Newbie
Rover 75 Join Date: Nov 2012
Location: Ballinamore
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() And would you use the head saver shim under the Payen elastomer gasket
|
![]() |
![]() |
![]() |
#6 |
Posted a thing or two
ex. MG ZT+ Join Date: May 2013
Location: Northampton-ish
Posts: 1,484
Thanks: 156
Thanked 98 Times in 95 Posts
|
![]() That depends on the head height after and necessary machining, and the quality of the fire ring area.
__________________
'03 MG ZT+ 1.8T X-Power Grey with Monogram 'WTD' black alcantara trim. [SIGPIC][/SIGPIC] My project thread HERE ![]() |
![]() |
![]() |
![]() |
#7 |
Newbie
Rover 75 Join Date: Nov 2012
Location: Ballinamore
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Thats great Tom, i wonder could you help me on something else i need to replace the front catalytic converter and was wondering what size exhaust sleeve do i need to fit the front exhaust.
|
![]() |
![]() |
![]() |
#8 |
Posted a thing or two
ex. MG ZT+ Join Date: May 2013
Location: Northampton-ish
Posts: 1,484
Thanks: 156
Thanked 98 Times in 95 Posts
|
![]() 67mm rings a bell, try and confirm though. I'm on the train at the moment so can't check.
__________________
'03 MG ZT+ 1.8T X-Power Grey with Monogram 'WTD' black alcantara trim. [SIGPIC][/SIGPIC] My project thread HERE ![]() |
![]() |
![]() |
![]() |
#9 |
Newbie
Rover 75 Join Date: Nov 2012
Location: Ballinamore
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() ok thanx Tom
|
![]() |
![]() |
![]() |
|
|