Stocktake

actros · 9th October 2009, 15:24

Just like to say a very BIG THANK YOU TO Dave (stocktake ) for fitting my fan sensor and fitting a anti glare mirrow for that was a bit of a job, once again Dave a big thank you, and thanks to Russ for coming and doing my speed lock.

windrush · 9th October 2009, 15:31

What nice fellas they are up there in Yorkie

stocktake · 9th October 2009, 18:01

Thanks to Actros for making me think I had two heads (his was always next to mine looking over my shoulder )

And I don't think I would have got through half a jar of coffee on my own

.

Slow speed fan resistor was done in about 40 mins but the interior mirror required a male connector with elongated prong ( around 10 to 15mm) Managed to scavenge something to fabricate from a PC

Took us well over an hour!!

For those interested the 14 pin WHITE ( some models have a black plug

) at the base of the A pillar by the windscreen

Pin 3 neg black Already populated
Pin 13 insert Ign live yellow/white
pin 14 insert reversing switch live green/redishbrown

On Actros's car the wire supplying pins 13 and 14 were both green / redishbrown

Usual disclaimers apply.

FredSpencer · 9th October 2009, 19:08

Why wasn't this meet advertised? I've had to drink my own coffee!

And where are the revealing photos? Maybe that's why I wasn't invited

9th October 2009, 15:24	#1
actros Subscribed Member 20lt 75conny se Damson red Join Date: Nov 2006 Location: BRIGG Nth Lincs Posts: 4,060 Thanks: 1,267 Thanked 942 Times in 318 Posts	Stocktake Just like to say a very BIG THANK YOU TO Dave (stocktake ) for fitting my fan sensor and fitting a anti glare mirrow for that was a bit of a job, once again Dave a big thank you, and thanks to Russ for coming and doing my speed lock. __________________ membership number 11

9th October 2009, 15:31	#2
windrush This is my second home December 2004 Rover 75 2ltr CDTi Connoisseur SE HL Tourer Join Date: Nov 2006 Location: Aldershot Posts: 74,464 Thanks: 2,431 Thanked 3,015 Times in 2,347 Posts	What nice fellas they are up there in Yorkie __________________ ][SIGPIC][/SIGPIC] My Pearl Black Beauty Best regards Lilian and Derek Club Member No. 96 / Forum User No. 111 REGISTRATION to the club as a member FREE, FULL MEMBERSHIP is £10 WE WILL REMEMBER THEM

9th October 2009, 18:01	#3
stocktake Vis Whiz Rover 75 2.5 auto Saloon Join Date: Jun 2007 Location: LEEDS Posts: 20,593 Thanks: 2,057 Thanked 3,056 Times in 1,621 Posts	Thanks to Actros for making me think I had two heads (his was always next to mine looking over my shoulder ) And I don't think I would have got through half a jar of coffee on my own . Slow speed fan resistor was done in about 40 mins but the interior mirror required a male connector with elongated prong ( around 10 to 15mm) Managed to scavenge something to fabricate from a PC Took us well over an hour!! For those interested the 14 pin WHITE ( some models have a black plug) at the base of the A pillar by the windscreen Pin 3 neg black Already populated Pin 13 insert Ign live yellow/white pin 14 insert reversing switch live green/redishbrown On Actros's car the wire supplying pins 13 and 14 were both green / redishbrown Usual disclaimers apply. __________________ Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident Last edited by stocktake; 9th October 2009 at 20:36..

9th October 2009, 19:08	#4
FredSpencer Passed Away Typhoon ZT 190+ Saloon Join Date: Aug 2009 Location: Leeds Posts: 6,833 Thanks: 0 Thanked 18 Times in 10 Posts	Why wasn't this meet advertised? I've had to drink my own coffee! And where are the revealing photos? Maybe that's why I wasn't invited