|
||
|
30th June 2016, 17:00 | #1 |
Newbie
Rover 75 Saloon, 2.0 CDTi, 131ps, Connoisseur, 2005 Join Date: Jun 2016
Location: CRYMYCH
Posts: 17
Thanks: 15
Thanked 5 Times in 1 Post
|
"05" 75 Con 2.0 CDTi saloon,Water in drivers footwell **SORTED**
Hi got my "05" 75 2.0 CDTi 135+ last month. It had to go back to the dealer to have the thermostat replaced. When I picked it up this morning from the dealers, the car was parked on a very steep uphill slope and when I got home I noticed the Drivers footwell and rear drivers pax footwell were full of water, I actually sucked out about 1/2 of a Vax machine.
I done the plenum check and sure enough the one under the shield was blocked which I cleared and quite a lot of water came out, could this have been the cause of ingress of water into the drivers footwell? there had been torrential rain the last two days. regards, bigtaff P.s. The Passenger side front and rear footwells were dry. P.p.s Is there a plenum hole on the drivers side as well? Have also posted this in the plenum sticky as well (sorry)
__________________
Rover 75, "05", 2.0 CDTi 131ps, Connoisseur Edition, First mod to do, "The Plenum's" -Done 2nd: PCV Filter - Done 3rd: Intercooler "O" rings My Vehicle was born at 1606hrs on Thurs 25th February 2005 My vehicle was the 110,462nd 75 to run off the production line, out of 112,381 My vehicle was the 4,513th 75 CDT Connoisseur SE (135) to be made out of 4,744 My vehicle was the 1,282nd 75 in Platinum Gold (code: MCN) to be made out of 1,685 Platinum Gold 75s |
|
|