Cooling Fan Motors - Page 11

Keith · 31st July 2007, 14:51

Yep brushes are the same in both motors but as Andy says not a separately available or replaceable part as far as Siemens are concerned so I would not expect them to provide them separately

You are doing a sterling job mr Mableson

Jules · 31st July 2007, 16:02

Hold on again!!
Presumably Seimens don't make brushes themselves so we just have to find out where they get them from!

Bribe someone

amableson · 31st July 2007, 17:28

Leave it to me i'll see what i can do, in years gone by i used to visit the shop floor and 'borrow' some off the assembly line, now i'm self employed!!!!!!

RLeon · 31st July 2007, 19:42

If you are looking for brushes try here:
http://www.technikline.com/pi1422565...?categoryId=27
One set, 4 brushes is €8,50 + €3.50 for shipping in Europe, is about 8 pound :lol: .

RLeon

Jules · 31st July 2007, 19:52

Great link!
Just need an interpreter now! I cannot see the exact size we need.

Anyone thought of changing the actual brush holders; it might open our options a great deal? Just a thought.

RLeon · 31st July 2007, 20:36

From what I have read in other forums, the first set of 4 brushes would be correct: 5x10x24mm.

Kohlebürste: Brushes
Lüftermotoren z.B. Rover: cooling fan motors e.g. Rover
Kaufen: buy
Google can do a better job

Lates · 31st July 2007, 21:04

I think they are 9x4x21

Jules · 31st July 2007, 22:02

Just found Keith's measurements again:

Brush Length 22mm
Brush Width 9.6mm
Brush Thickness 4.6mm
All four long edges have a very slight chamfer

Copper braid exits centre back of one of the wider sides and is about 1 to 1.5mm thick and about 2mm wide (not easy to measure really)! Braid needs to be capable of carrying say 40-60A and needs to be at least 35mm long.

So I am going to try a set, with probably a little emery cloth to reduce the dimensions to make them fit perfectly.
It even mentions Rover when you add a set to the shopping basket!!

http://www.technikline.com/pd-950330...?categoryId=29

Kohlebürste LF1008 für Lüftermotoren z.B. Rover
5x10x24mm für Lüftermotoren
Art.Nr.: LF1008

lf1008.jpg

Preis: EUR 8,50
Preis inkl. MwSt zzgl. Versandkosten
Lieferzeit: -sofort-

Mindestbestellmenge: 1
Satz Artikel merken

Für Lüftermotoren unterschiedlicher Hersteller
5x10x24mm
1Satz =4Bürsten

z.B. für Rover-Kühlerventilatoren

Anybody speak German?

JohnDotCom · 31st July 2007, 22:47

They say its similar to Welsh,
Well I'm struggling with it, can't see the similarity.
You could put it through Google.

David3807 · 1st August 2007, 00:43

Try this for translations:

http://babelfish.altavista.com/tr

Not perfect but you get the meaning of most translations.

31st July 2007, 16:02	#102
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Hold on again!! Presumably Seimens don't make brushes themselves so we just have to find out where they get them from! Bribe someone __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

31st July 2007, 17:28	#103
amableson Gets stuck in Ex Rover 75 owner Join Date: Nov 2006 Location: Boston, Lincolnshire. Posts: 553 Thanks: 0 Thanked 2 Times in 2 Posts	Leave it to me i'll see what i can do, in years gone by i used to visit the shop floor and 'borrow' some off the assembly line, now i'm self employed!!!!!! __________________ Regards Andrew.[SIGPIC][/SIGPIC]

31st July 2007, 19:52	#105
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Great link! Just need an interpreter now! I cannot see the exact size we need. Anyone thought of changing the actual brush holders; it might open our options a great deal? Just a thought. __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

31st July 2007, 22:02	#108
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Just found Keith's measurements again: Brush Length 22mm Brush Width 9.6mm Brush Thickness 4.6mm All four long edges have a very slight chamfer Copper braid exits centre back of one of the wider sides and is about 1 to 1.5mm thick and about 2mm wide (not easy to measure really)! Braid needs to be capable of carrying say 40-60A and needs to be at least 35mm long. So I am going to try a set, with probably a little emery cloth to reduce the dimensions to make them fit perfectly. It even mentions Rover when you add a set to the shopping basket!! http://www.technikline.com/pd-950330...?categoryId=29 Kohlebürste LF1008 für Lüftermotoren z.B. Rover 5x10x24mm für Lüftermotoren Art.Nr.: LF1008 lf1008.jpg Preis: EUR 8,50 Preis inkl. MwSt zzgl. Versandkosten Lieferzeit: -sofort- Mindestbestellmenge: 1 Satz Artikel merken Für Lüftermotoren unterschiedlicher Hersteller 5x10x24mm 1Satz =4Bürsten z.B. für Rover-Kühlerventilatoren Anybody speak German? __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block Last edited by Jules; 31st July 2007 at 23:02..

31st July 2007, 14:51	#101
Keith This is my second home ZT400 Join Date: Oct 2006 Location: Ellesmere Posts: 5,948 Thanks: 0 Thanked 43 Times in 29 Posts	Yep brushes are the same in both motors but as Andy says not a separately available or replaceable part as far as Siemens are concerned so I would not expect them to provide them separately You are doing a sterling job mr Mableson

31st July 2007, 19:42	#104
RLeon Avid contributor Audi A3 E-tron/Triumph Stag/MG7 (1:18) Join Date: Jul 2007 Location: Limburg Posts: 121 Thanks: 1 Thanked 11 Times in 7 Posts	If you are looking for brushes try here: http://www.technikline.com/pi1422565...?categoryId=27 One set, 4 brushes is €8,50 + €3.50 for shipping in Europe, is about 8 pound :lol: . RLeon

31st July 2007, 20:36	#106
RLeon Avid contributor Audi A3 E-tron/Triumph Stag/MG7 (1:18) Join Date: Jul 2007 Location: Limburg Posts: 121 Thanks: 1 Thanked 11 Times in 7 Posts	From what I have read in other forums, the first set of 4 brushes would be correct: 5x10x24mm. Kohlebürste: Brushes Lüftermotoren z.B. Rover: cooling fan motors e.g. Rover Kaufen: buy Google can do a better job

31st July 2007, 21:04	#107
Lates This is my second home Jaguar XE Join Date: Nov 2006 Location: Coventry Posts: 4,321 Thanks: 56 Thanked 59 Times in 55 Posts	I think they are 9x4x21

31st July 2007, 22:47	#109
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	They say its similar to Welsh, Well I'm struggling with it, can't see the similarity. You could put it through Google.

1st August 2007, 00:43	#110
David3807 Posted a thing or two 2002 R75 Conn SE 2.5l Auto Tourer, 2001 R75 Conn SE 2.5 Auto Saloon Join Date: Nov 2006 Location: Gravesend Posts: 1,897 Thanks: 0 Thanked 2 Times in 2 Posts	Try this for translations: http://babelfish.altavista.com/tr Not perfect but you get the meaning of most translations.