Northants Owners Please - Page 8

Phil-T4 · 3rd November 2014, 07:39

Thanks for putting this together Paul, brilliant first effort

Looking forward to the next one.

Paulym · 3rd November 2014, 16:54

I have now had a chance to look through the photos. (Work web is blocking images). I have to say that these photos are brilliant and the sky seems mean and moody in many of them giving some stunning effects.

I can say no more other than to thank you all again for your support. My input was minimal and the results beyond my wildest.

Would you be interested for next time if I can find a friendly dent master? Let me know if this added value is worth getting lined up. Not sure if it is possible but I will start digging around if there is enough interest to charm a local supplier into attending. I have been so impressed with what Ian has achieved at the Kings Lynn meet that I am sure there is a market for this. Having mentioned the level of service to a few of the guys there on Sunday and the potential cost savings I am keen to investigate.

Or

If there are any services that you think you would be good to see at a meet then I am willing to go look for them.

ATB

RogerHeinz57 · 3rd November 2014, 17:22

Quote:

Originally Posted by Paulym

Hi Everyone

Thanks really are down to you for coming along to support. Despite a damp start it turned out far better than I expected.

I certainly enjoyed meeting everyone and a great diversion when a load of old Seamen looking to dock in Lithuania appeared.

JohnH was in full song too so made for a thoroughly entertaining day! Good to see so many from near and far. My expectations were indeed far exceeded.

I haven't had a chance to look through the pigcures yet as my wok PC blocks them But from the few thumbnails I could see looked great. Will review later.

Just a last note to all of you for chipping in. I really did not expect that at all. I am truly grateful. I have as I said not much talent when it comes to practical involvement. So the coffee and nibbles is my way of paying back the help and advice I have benefited from to date. Next time I may have to bake a cake!

I will be arranging another event although I think it will be early part of next year now. I was a little uncertain that the venue suited but it would seem not to be the case.

ATB and see you all again.

I am used to a damp start every day !!!!! Thing is it gets worse as the hours go by. Think the pull-ups need upgrading! LOL

Thanks for a great meeting. Dont forget closure panels fitting offer.
Cheers JH.

Paulym · 3rd November 2014, 17:49

Hi John

If you need my missus can supply she does work in the care industry so has a ready source of supply.

I am looking forward to tying up with you with ref to the compensator and all the other bits, As Paul G is dropping down with wheels this weekend how about getting together at yours to get all done in one place

Not pushing might be fun though

ATB

3rd November 2014, 16:54	#72
Paulym Loves to post Rover 2.5V6 Connie SE (White Gold) Join Date: Oct 2013 Location: Rushden Posts: 378 Thanks: 166 Thanked 70 Times in 53 Posts	My absolute pleasure I have now had a chance to look through the photos. (Work web is blocking images). I have to say that these photos are brilliant and the sky seems mean and moody in many of them giving some stunning effects. I can say no more other than to thank you all again for your support. My input was minimal and the results beyond my wildest. Would you be interested for next time if I can find a friendly dent master? Let me know if this added value is worth getting lined up. Not sure if it is possible but I will start digging around if there is enough interest to charm a local supplier into attending. I have been so impressed with what Ian has achieved at the Kings Lynn meet that I am sure there is a market for this. Having mentioned the level of service to a few of the guys there on Sunday and the potential cost savings I am keen to investigate. Or If there are any services that you think you would be good to see at a meet then I am willing to go look for them. ATB __________________ [SIGPIC][/SIGPIC] My own true Constance Boot Release Mod Walnut trims, Tail Light Seals & Torpedoes T4 Health check done (Thanks Mr T4 ) Real Walnut Dash (Thanks Paul D) Power Folds (one down one to go) Timing Belts Pump and Matrix Replaced (Phil T4) Bonnet release mod (Thanks Paul D) IPK De-lined (Thanks klarzy) New wheels (Thanks Paul D) Compensator, LED bulbs ABS Sensor and more(Thanks John H) Projectors (Thanks Paul D) Puddle light LED Strips Mods to do: Rear Spoiler?

3rd November 2014, 17:49	#74
Paulym Loves to post Rover 2.5V6 Connie SE (White Gold) Join Date: Oct 2013 Location: Rushden Posts: 378 Thanks: 166 Thanked 70 Times in 53 Posts	Pull Ups Hi John If you need my missus can supply she does work in the care industry so has a ready source of supply. I am looking forward to tying up with you with ref to the compensator and all the other bits, As Paul G is dropping down with wheels this weekend how about getting together at yours to get all done in one place Not pushing might be fun though ATB __________________ [SIGPIC][/SIGPIC] My own true Constance Boot Release Mod Walnut trims, Tail Light Seals & Torpedoes T4 Health check done (Thanks Mr T4 ) Real Walnut Dash (Thanks Paul D) Power Folds (one down one to go) Timing Belts Pump and Matrix Replaced (Phil T4) Bonnet release mod (Thanks Paul D) IPK De-lined (Thanks klarzy) New wheels (Thanks Paul D) Compensator, LED bulbs ABS Sensor and more(Thanks John H) Projectors (Thanks Paul D) Puddle light LED Strips Mods to do: Rear Spoiler?

3rd November 2014, 07:39	#71
Phil-T4 I really should get out more....... MG ZT-T, Rover 75 Tourer Join Date: Mar 2011 Location: Olney Posts: 2,969 Thanks: 245 Thanked 1,088 Times in 657 Posts	Thanks for putting this together Paul, brilliant first effort Looking forward to the next one.