message centre lights

ceedy · 3rd March 2020, 08:19

Can someone point me to a page with the message centre lights , got one on but with a liney display its tricky to figure what it is

ta.

Chris

ps. tis one of these I think but with a Cross over it ?

.

vitesse · 3rd March 2020, 08:37

If it's an engine with a cross over it then, it's immobilised. P.91 in my handbook (Swedish edition). Possible corruption of the signal between the EWS and main EMU (ECU). Needs someone like BigRuss to sort it out, or perhaps Chris in Fareham.

Regards

Arctic · 3rd March 2020, 08:51

If it is the yellow engine sign with a X through it, then it points to the engine being disabled, could have something to do with the key fob and ring round the ignition.

Will the car start ok and run ok?

ceedy · 3rd March 2020, 08:52

Got to work ok, and the car still starts and runs ok ?

C

Quote:

Originally Posted by vitesse

If it's an engine with a cross over it then, it's immobilised. P.91 in my handbook (Swedish edition). Possible corruption of the signal between the EWS and main EMU (ECU). Needs someone like BigRuss to sort it out, or perhaps Chris in Fareham.

Regards

Arctic · 3rd March 2020, 08:54

[QUOTE]

Quote:

Originally Posted by ceedy

Got to work ok, and the car still starts and runs ok

?

Are we talking diesel car here, and are you certain its the yellow engine symbol with an X or is it just the engine check symbol, if diesel try unplugging the low fuel sensor and clean with contact cleaner, push on and off a few times.

1

ceedy · 3rd March 2020, 09:05

tis the diesel , when its never put a foot wrong in 16 years, its all a bit new identifying a problem

Chris

[QUOTE=Arctic;2796631]

Quote:

?

Are we talking diesel car here, and are you certain its the yellow engine symbol with an X or is it just the engine check symbol, if diesel try unplugging the low fuel sensor and clean with contact cleaner, push on and off a few times.

1

ceedy · 4th March 2020, 10:31

That light has not come back on , car is running as Normal..

But ?..

Thought i would have a peek at the system with my OBD2 Reader to see if anything is reported this morning and all I get is an error in Communication ??.

Always had no problem with the reader.. any connections bettween these 2 probs ? , is there any fuse i can check that can prevent comms?

ta

Chris

COLVERT · 6th March 2020, 10:42

Could simply be that a contact needs cleaning as Artic says.

It's probably just age related rather than a component failure.

3rd March 2020, 08:19	#1
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,076 Thanks: 916 Thanked 1,214 Times in 768 Posts	message centre lights Can someone point me to a page with the message centre lights , got one on but with a liney display its tricky to figure what it is ta. Chris ps. tis one of these I think but with a Cross over it ? . __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's Last edited by ceedy; 3rd March 2020 at 08:26..

3rd March 2020, 08:51	#3
Arctic Give to Learn Freelander 2 Join Date: Aug 2010 Location: West Midlands Posts: 18,713 Thanks: 1,155 Thanked 6,407 Times in 3,874 Posts	If it is the yellow engine sign with a X through it, then it points to the engine being disabled, could have something to do with the key fob and ring round the ignition. Will the car start ok and run ok? __________________ Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise "

4th March 2020, 10:31	#7
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,076 Thanks: 916 Thanked 1,214 Times in 768 Posts	That light has not come back on , car is running as Normal.. But ?.. Thought i would have a peek at the system with my OBD2 Reader to see if anything is reported this morning and all I get is an error in Communication ??. Always had no problem with the reader.. any connections bettween these 2 probs ? , is there any fuse i can check that can prevent comms? ta Chris __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's

3rd March 2020, 08:37	#2
vitesse I really should get out more....... Rover 75 Saloon Join Date: Jul 2011 Location: Gävle Posts: 2,533 Thanks: 395 Thanked 823 Times in 652 Posts	If it's an engine with a cross over it then, it's immobilised. P.91 in my handbook (Swedish edition). Possible corruption of the signal between the EWS and main EMU (ECU). Needs someone like BigRuss to sort it out, or perhaps Chris in Fareham. Regards

6th March 2020, 10:42	#8
COLVERT This is my second home R75 Saloon. Join Date: Feb 2009 Location: France/or Devon. Posts: 14,003 Thanks: 3,851 Thanked 2,167 Times in 1,816 Posts	Could simply be that a contact needs cleaning as Artic says. It's probably just age related rather than a component failure.