|
||
|
6th December 2006, 16:58 | #1 |
Regular poster
none Join Date: Nov 2006
Location: none
Posts: 93
Thanks: 0
Thanked 0 Times in 0 Posts
|
Sat Nav BMW TV Tuner Info
Last edited by Dragrad; 24th August 2014 at 22:22.. Reason: Link updated |
6th December 2006, 17:45 | #2 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Really really useful (ICE) info
Using DeeCees above as an example, same rules as in the Tech Forum, info in this thread are for ICE links here only not, help how do I do... etc etc post a thread for that please
Last edited by Keith; 6th December 2006 at 17:56.. |
6th December 2006, 18:01 | #3 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
A Supplier for Hi-Line nav retrofit cables
A Supplier for Hi-Line Nav cabling Looms, from Arjan they will custom make them if required to suit the hardware being installed, different Radio no TV etc.
http://www.kufatec.de/ actual link here http://shop.kufatec.de/product_info....t.html/cat/126 If you have a later car with ISO connectors you will need one like this as well A supplier http://cgi.ebay.de/Anschlusskabel-Ra...QQcmdZViewItem plenty available and they also do the individual socket and pins |
6th December 2006, 18:16 | #4 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Hi-Line Service Mode
High line/navigation
The service mode for the harmony head unit is accessed by switching ‘on’ the radio unit using the right hand rotary control and within eight seconds press and hold the left hand side of the 'TRAFFIC' button for a minimum of eight seconds. Using the radio seek up/tape forward button (>) select the required option from the list in the display. From there you can change the settings in the list below. 1. Displays the serial number. 2. Displays the software version. 3. Displays the AVC setting in a range from GAL 1 to GAL 6. (default value is GAL 1 the remaining numbers, GAL 2 to GAL 6, are used to provide differing levels of output). Selecting the levels is done by pressing the station preset buttons one to six. 4. Displays the frequency, programme service (PS) name, field strength, field quality and programme information (PI), it is possible to check out each of the preset stations by using the appropriate preset buttons and the frequency selector button (AM/FM button). The field strength is shown as F—, where F00 is the weakest signal and F15 being the strongest signal. The quality is shown as Q—, with Q00 being the lowest quality and Q15 being the best quality. 5. Displays the seek level as either a one or a two. This is adjusted using preset buttons one and two. 6. Displays the TP volume. This can be adjusted using preset buttons one and two to adjust the TP volume between –9 and +9. To exit service mode switch the unit 'off'. |
8th December 2006, 16:59 | #5 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Hi-Line CD Changer Pinout info
Hi-Line CD Changer Pinout info
Left and Right Audio, a Ground Wire, a +12V Wire and a connection to the K-Bus. Pin 8 Ground Pin 10 +12V Pin 5 K-Bus Pin 1 & 2 are one audio pair and pin 6 & 7 the other, wiring diagram does not indicate which is Left and Right though Last edited by Keith; 15th December 2006 at 10:03.. |
15th December 2006, 14:12 | #6 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
MP3 Changer and interface for Hi-Line Nav cars
MP3 Changer and interface for Hi-Line Nav cars
Is your German any good? http://www.acvgmbh.de/c-quence/ and http://www.acvgmbh.de/c-quence/cd_mp...nce_einbau.pdf |
27th December 2006, 09:31 | #7 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Denison Products to replace the CD changer
From XPF
"As far as I was aware - the following work fine on the High Line +Nav from Dension: Ice Link Plus - ILPRBP8CR1 - IPOD only Gateway 300 - GW3RBP8001 (any MP3 player) Gateway 400 - GW4RBP8001 (any MP3 + keep your CD changer) http://www.dension.com/main.htm" The Gateway device looks very interesting especially if coupled to a USB HDD |
21st March 2007, 15:41 | #8 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Just been looking for Glass mount FM aerials and got side tracked like you do.
How about this for a non offset dual or single din adapter? http://www.bluespot.co.uk/install/show_model.asp?id=225 |
21st March 2007, 15:45 | #9 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
Some Dab info
Some Dab info
http://www.mmsa.org.uk/guides/car_au...tal_radio.html I did not realise a different aerial was required |
25th March 2007, 13:07 | #10 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
A reminder guys info threads are for you all to post titbits of info but not really suitable for subsequent discussion or related questions unless correcting a mistake otherwise the value of the thread may be lost
If something warrants a question please start a new thread and if appropriate link to the post here as part of that thread |
|
|