|
||
|
18th June 2021, 11:02 | #1 |
Loves to post
Rover 75 Tourer CDT Join Date: Apr 2014
Location: Alexandria
Posts: 462
Thanks: 451
Thanked 30 Times in 30 Posts
|
help please parrot bluetooth
Hi all i have installed a parrot bluetooth Mki9200 in my 75 tourer with high line all i have done is plug it in it seems to work although i have loose wires not doing anything albeit it works but doesn't say goodby when turning off plus i have a 10 DVD player in the boot which has a pull down screen in the back seat which since connecting the parrot is giving out a constant beep beep beep coming from the built in speaker in the screen not from the car speakers i've tried to explain clearly what the problem is in the hope someone can help me thank you in advance for any advice
|
18th June 2021, 17:29 | #2 |
Avid contributor
rover 75 Join Date: May 2016
Location: Home
Posts: 203
Thanks: 6
Thanked 99 Times in 70 Posts
|
Hope this helps.
To perform the installation check, turn the ignition on then off once the Parrot MKi9200 is installed: the message “Goodbye!” must be displayed. If it is not the case, it is necessary to inverse the positions of the red and orange wires. Indeed,the red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V ignition and the black wire to the ground. This can be done simply by reversing both fuse holders located on the Parrot wiring.
__________________
Illegitimi non carborundum |
18th June 2021, 17:36 | #3 | |
Loves to post
Rover 75 Tourer CDT Join Date: Apr 2014
Location: Alexandria
Posts: 462
Thanks: 451
Thanked 30 Times in 30 Posts
|
Quote:
|
|
19th June 2021, 08:44 | #4 |
Loves to post
Rover 75 Tourer CDT Join Date: Apr 2014
Location: Alexandria
Posts: 462
Thanks: 451
Thanked 30 Times in 30 Posts
|
|
19th June 2021, 11:57 | #5 |
Avid contributor
rover 75 Join Date: May 2016
Location: Home
Posts: 203
Thanks: 6
Thanked 99 Times in 70 Posts
|
Glad you got it sorted.
__________________
Illegitimi non carborundum |
Thread Tools | |
Display Modes | |
|
|