What I did with my Rover 75/MG ZT today? - Page 936

keithst24 · 29th March 2019, 14:32

Helped Percy Urwin fit his club badge😁🙂😁

Sent from my SM-G975F using Tapatalk

CimmaronG · 29th March 2019, 16:53

Replaced rear discs and pads, then a wash.

patrolman pete · 29th March 2019, 19:36

After yesterday's delayed train journey I eventually reached Ilkeston where I was collected at the station by Tom Hobb's Dad and taken to collect my tourer . What a brilliant job he has carried out making the repair look factory fresh and matching the stone chip line and just primering the repair as I requested.

Today all I had to do was lightly flat the sills and apply the moonstone basecoat and clearcoat whilst the sun shone brightly and was so pleased with the finished job that I rolled across my drive to my Connie and replaced my lower engine mount and undertray screws before celebrating with a couple of beers

FLYING BANANA · 29th March 2019, 20:01

Topped up the oil in the Bear’s supercharger, that’s the 2nd time I had to do that in three and a half years.
Then took her for nice blast up the road .

Mike Noc · 29th March 2019, 20:49

Finished welding in the replacement off side rear sill section on Big Ron and gave it a coat of primer.

Will paint both sides tomorrow.

That just leaves the reversing switch and washers to sort.

trikey · 29th March 2019, 20:50

Quote:

Originally Posted by Mike Noc

Finished welding in the replacement off side rear sill section on Big Ron and gave it a coat of primer.

Will paint both sides tomorrow.

That just leaves the reversing switch and washers to sort.

Yayyy, about time he was back on the road

marinabrian · 29th March 2019, 23:54

I spotted an MG6 taxi today, it was smoking like a Deltic on cold startup.

Yuk

I've covered more miles today in the ZT than I've covered in the 75 since it's last MOT though

Brian

bl52krz · 30th March 2019, 09:17

Quote:

Originally Posted by FLYING BANANA

Topped up the oil in the Bear’s supercharger, that’s the 2nd time I had to do that in three and a half years.
Then took her for nice blast up the road .

That will be two calls at Mr Shell then.

Gigagator · 30th March 2019, 12:16

Took the 75 for MOT. Passed, no advisories! Wooo!

smudge.g · 30th March 2019, 13:21

Quote:

Originally Posted by Gigagator

Took the 75 for MOT. Passed, no advisories! Wooo!

well done Sir on the pass, another survives for another year!!

29th March 2019, 14:32	#9351
keithst24 This is my second home X Power Grey MGZT 180+ Auto... Bumble & 1.8T Odessey Rover 75 Contemporary SE manual Join Date: Nov 2015 Location: Reigate Posts: 5,375 Thanks: 2,254 Thanked 1,801 Times in 1,403 Posts	Helped Percy Urwin fit his club badge😁🙂😁 Sent from my SM-G975F using Tapatalk __________________ [SIGPIC][/SIGPIC] Bumble Membership Number 35478 Born Monday, 16th June 2003 @ 14:30:35 This vehicle was the 9,196th ZT to run off the production line, out of 18,894 This vehicle was the 576th ZT 180 + to be made out of 828 This vehicle was the 871st ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs

29th March 2019, 16:53	#9352
CimmaronG Gets stuck in Roverless at present :-( Join Date: Aug 2012 Location: Walsall Posts: 964 Thanks: 305 Thanked 99 Times in 95 Posts	Replaced rear discs and pads, then a wash. __________________ My Rover 75 2.0CDTi (131Ps) Conn SE Tourer Left the production line 08:07:14hrs on 01/07/2004 'Best to have it and not need it, than need it and not have it'

29th March 2019, 20:01	#9354
FLYING BANANA Moderator/Club Shop MG ZT 1.8t+. No.3 of 4 in Sunspot Yellow & Ford Fiesta in Black. Join Date: Aug 2010 Location: Rattler Farm Posts: 22,565 Thanks: 9,270 Thanked 15,645 Times in 6,806 Posts	Topped up the oil in the Bear’s supercharger, that’s the 2nd time I had to do that in three and a half years. Then took her for nice blast up the road . __________________ 233,431. That’s our second meet done, no.3 next weekend. onen hag oll

29th March 2019, 19:36	#9353
patrolman pete Posted a thing or two Rover 75 club se tourer CDT and a Connoisseur SE Diesel Auto Saloon Join Date: Nov 2006 Location: Houghton - le - Spring Posts: 1,418 Thanks: 618 Thanked 333 Times in 197 Posts	After yesterday's delayed train journey I eventually reached Ilkeston where I was collected at the station by Tom Hobb's Dad and taken to collect my tourer . What a brilliant job he has carried out making the repair look factory fresh and matching the stone chip line and just primering the repair as I requested. Today all I had to do was lightly flat the sills and apply the moonstone basecoat and clearcoat whilst the sun shone brightly and was so pleased with the finished job that I rolled across my drive to my Connie and replaced my lower engine mount and undertray screws before celebrating with a couple of beers

29th March 2019, 20:49	#9355
Mike Noc This is my second home Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009 Location: Hampshire Posts: 11,550 Thanks: 3,470 Thanked 3,119 Times in 2,247 Posts	Finished welding in the replacement off side rear sill section on Big Ron and gave it a coat of primer. Will paint both sides tomorrow. That just leaves the reversing switch and washers to sort.

29th March 2019, 23:54	#9357
marinabrian MG ZT Join Date: Jan 2011 Location: Newcastle Upon Tyne Posts: 20,151 Thanks: 3,565 Thanked 10,837 Times in 5,718 Posts	I spotted an MG6 taxi today, it was smoking like a Deltic on cold startup. Yuk I've covered more miles today in the ZT than I've covered in the 75 since it's last MOT though Brian

30th March 2019, 12:16	#9359
Gigagator Avid contributor Rover 75 Saloon, Rover 25, Mazda 6 Join Date: Apr 2018 Location: Cardiff Posts: 219 Thanks: 143 Thanked 112 Times in 49 Posts	Took the 75 for MOT. Passed, no advisories! Wooo!