under seat airbag connectors - Page 3

BigRuss · 9th November 2022, 10:00

Quote:

Originally Posted by Arctic

Hi David.
These are a good alternative to the original ones, if you are going to change them over.

Used successfully at a few Nano meets, i made these up myself but you can order them already made.

1

https://www.ebay.co.uk/itm/10pc-kit-...kAAOSwrhBZAhj0

Thanks Steve I recently got hold of some of these, but the type without the wires as they were out of stock.

10 pairs of connectors for £5.49 but you have to crimp the contacts onto the wires then insert them into the connector blocks.
Bit fliddly but once you've got the orientation right the contacts just clip into place in the connectors.

Russ

Arctic · 9th November 2022, 12:47

Quote:

Originally Posted by BigRuss

Thanks Steve I recently got hold of some of these, but the type without the wires as they were out of stock.

10 pairs of connectors for £5.49 but you have to crimp the contacts onto the wires then insert them into the connector blocks.
Bit fliddly but once you've got the orientation right the contacts just clip into place in the connectors.

Russ

Hi Russ.
I made my own up as well, but you can still get them already made up.
https://www.ebay.co.uk/itm/384786960...r=652957952131

I also like the look of these below, connectors only though.
https://www.ebay.co.uk/itm/354204009...r=623585179535

Then there are these which seem to screw together.
https://www.ebay.co.uk/itm/144026554518

daveo138 · 9th November 2022, 13:03

When I was removing my interior to dry the carpets, I found that the wires for the airbag on the passenger seat had been soldered, so I had to cut them to remove the seat. I didn't have any connectors to hand when refitting, so I used standard choc-block connectors, but crimped some ferrules onto the ends of the wires first, to make a more secure mechanical connection.

When I fitted my DRLs, I ordered some of these connectors from Aliexpress. They do need to be crimped, though.

https://www.aliexpress.com/item/4000...235418027Bqrx2

9th November 2022, 13:03	#23
daveo138 Gets stuck in Rover 75 Tourer Join Date: Mar 2022 Location: Chesterfield Posts: 680 Thanks: 206 Thanked 69 Times in 53 Posts	When I was removing my interior to dry the carpets, I found that the wires for the airbag on the passenger seat had been soldered, so I had to cut them to remove the seat. I didn't have any connectors to hand when refitting, so I used standard choc-block connectors, but crimped some ferrules onto the ends of the wires first, to make a more secure mechanical connection. When I fitted my DRLs, I ordered some of these connectors from Aliexpress. They do need to be crimped, though. https://www.aliexpress.com/item/4000...235418027Bqrx2