|
||
|
||
|
![]() |
#1 |
This is my second home
Does not matter Join Date: Mar 2013
Location: .
Posts: 3,996
Thanks: 2,397
Thanked 1,575 Times in 987 Posts
|
![]() Following on from my previous post I have removed the glovebox, but I cannot see how I might be able to make the glovebox light sit correctly. The light is being stopped from sitting flush by the large wiring loom as shown below.
Please can anyone offer any advise as to whether this wiring should be able to be pushed back to allow room for the glovebox light. Thanks ![]() This is the wiring from behind. ![]() |
![]() |
![]() |
![]() |
#2 |
This is my second home
Transit Connect Join Date: Feb 2011
Location: Crewe
Posts: 9,532
Thanks: 868
Thanked 1,619 Times in 1,095 Posts
|
![]() Wow, that airbag detonator is rusty!
Looks like the loom needs tieing back tighter with the cable tie. |
![]() |
![]() |
![]() |
#3 |
This is my second home
1979 Capri 1.6L, 1982 Capri 1.6L, 2016 Dacia Stepway Join Date: Jun 2009
Location: Dorset
Posts: 8,596
Thanks: 3,496
Thanked 3,397 Times in 2,218 Posts
|
![]() Wow! Those pics show alot of rust, do you ever get wet carpets?
As Rich has said, tie the loom back further. |
![]() |
![]() |
![]() |
#4 |
This is my second home
Does not matter Join Date: Mar 2013
Location: .
Posts: 3,996
Thanks: 2,397
Thanked 1,575 Times in 987 Posts
|
![]() I did have wet carpets underneath, this was being caused by the sunroof drain leaking where the two pieces of tubing connect together.
There does not appear to be water coming in anywhere else. I washed the car with the glovebox removed and had a good check for leaks. |
![]() |
![]() |
![]() |
|
|