Navall2 Wiring Schematic

[coolcat]

Originally Posted by GeraintUK

bizzare, even the web tracking link says it's in Deeside !!!

Talk about getting ahead of themselves. Think i'll leave collecting it till about mid-week as the shop is in the rough area where i need bodyguard

I could drive it up to you..................but I won't

[GeraintUK]

Originally Posted by coolcat

I could drive it up to you..................but I won't

what happened to :

1) The customer is always right

2) When the customer is wrong, go to point one

[coolcat]

Originally Posted by GeraintUK

what happened to :

1) The customer is always right

2) When the customer is wrong, go to point one

That went out the window along with 'half penny chews' and bell bottom trousers

[theridler]

Hey hang on a moment....I can remrmber bellbottom trousers! :-)

[coolcat]

Originally Posted by theridler

Hey hang on a moment....I can remrmber bellbottom trousers! :-)

Showing your age there

[Radioguy]

Originally Posted by theridler

Hey hang on a moment....I can remrmber bellbottom trousers! :-)

I still wear them ! Purple with white pockets !

[coolcat]

Originally Posted by Radioguy

I still wear them ! Purple with white pockets !

You know what I'm going to say

[theridler]

Jeff..do you know which wire I could use to power a subwoofer amp? Also I'm a bit uncertain about swc wires...

[coolcat]

Originally Posted by theridler

Jeff..do you know which wire I could use to power a subwoofer amp? Also I'm a bit uncertain about swc wires...

None on the head unit wiring loom.
The only wires from head unit to amp would be the 12v remote trigger switch wire and the rca phono wires for the audio output.
The main power cable for an amp should be a direct feed to the battery for the positive and the negative would be connected from the amp to a suitable earthing point on the car bodywork.

The two swc wires from the double din, one black one brown need to be connected to the blue/orange and blue/purple wires in the car loom.
These can usually be found in the yellow/blue/green connector in the car loom.
You don't need to cut them off this connector, just splice the head unit wires into them.
It does not matter which way round you get them

[theridler]

Originally Posted by coolcat

None on the head unit wiring loom.
The only wires from head unit to amp would be the 12v remote trigger switch wire and the rca phono wires for the audio output.
The main power cable for an amp should be a direct feed to the battery for the positive and the negative would be connected from the amp to a suitable earthing point on the car bodywork.

The two swc wires from the double din, one black one brown need to be connected to the blue/orange and blue/purple wires in the car loom.
These can usually be found in the yellow/blue/green connector in the car loom.
You don't need to cut them off this connector, just splice the head unit wires into them.
It does not matter which way round you get them

Hi Jeff... yes I understand about the amp wiring I was just being lazy in my typing... what I was looking for was the amp control wire...(on navall 1 unit was it blue? & marked "amp c" or something???). Also my car doesn't have the yellow blue green connector... I think its been cut off previously to connect to an after market sony head unit swc...but I have got the blue/purple & blue/orange wires ...
Are the swc wires the ones marked key1-5v (brown, item 25) & key2-5v (brown/black, item 26) in wiring schematic in manual?