|
||
|
|
12th October 2019, 18:40 | #1 |
This is my second home
Rover 75 CDT-2001 Join Date: Jan 2009
Location: Wrexham, North Wales
Posts: 3,606
Thanks: 195
Thanked 606 Times in 501 Posts
|
Long lead time for a decent welder
Here is a problem. My rear sills need welding, and welders who do a decent job are in high demand, such that the wait will take me a month or two after the expiry of the MOT.
I am thinking i need a repair done good enough to get me through the MOT, then at least i can drive the car to get a better job done. A recent post mentioned T,Hobbs is currently taking bookings for next easter! Is there any harm having a welding job done now? I assume it can be re-done later by someone like Tom? What do you guys think? Jules mentioned some local guys who do patches, but not up to much cosmetically. |
12th October 2019, 18:59 | #2 |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
|
Suppose it depends on how far gone they are but the MoT testers up here don't consider the sills load bearing. One of my daughters' cars, bought during the summer needs a 18" repair section but flew through the MoT with a clean sheet.
Regards |
12th October 2019, 19:04 | #3 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,880
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
I was in the same position, mot before I got booked in with Tom. Passed without comment on the sills, so unless they're really bad, wouldn't worry too much
|
12th October 2019, 21:40 | #4 |
I really should get out more.......
A Reasonably Priced Car Join Date: Jan 2014
Location: Burton Latimer
Posts: 2,530
Thanks: 408
Thanked 1,064 Times in 712 Posts
|
My 75 is going in for sill repairs on Monday, usual place o/s/r either side of the jacking point, I won't mention the price I'm paying, but what I will say is -
I made my own templates ready for the guy who is doing the job, I used to do the MOTs for this garage before moving site. I can say they ARE GREAT value for money and honest in all things. If you want cheap, it will look cheap, but pay a bit more, or make up templates for them, it helps things along, they also think my car is superb and will enjoy the company of it. If anybody needs help with welding and happy to travel to NN15 area, I am happy to provide info of the garage ! |
13th October 2019, 07:21 | #5 | |
This is my second home
Rover 75 CDT-2001 Join Date: Jan 2009
Location: Wrexham, North Wales
Posts: 3,606
Thanks: 195
Thanked 606 Times in 501 Posts
|
Quote:
I would put it in for test without welding, but it is already holed now after he put his thumb through it last year. He passed it with an advisory then, but its another year passed since then. Would rather get it done. I have a few more places to try, but its difficult arranging since i dont get home very often. |
|
13th October 2019, 08:33 | #6 | |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
|
Quote:
My previous SD1s were also prone to sill rot, but no chance of getting one of those through even though the metal was thicker. Confused |
|
13th October 2019, 10:01 | #7 |
I really should get out more.......
A Reasonably Priced Car Join Date: Jan 2014
Location: Burton Latimer
Posts: 2,530
Thanks: 408
Thanked 1,064 Times in 712 Posts
|
There is likely to be some confusion on the rules regarding sills,as in countless other subjects mainly due to the unhealthy appetite for manipulation of set regulating rules as set out in the testers manual. So many things in life now seem to be argued and or new rules implemented by testers opinions or the public offering up a sweetener so their car will pass. & how many cars have been presented for test by owners here with ageing vehicles that score "No Advisories" Come on folks, really ? No corrosion, no wear on any bushes, tyres, joints. No suspension rear arm corrosion, headlamp aim too high. Come on, your not fooling me on this, if you believe all that, you must know the tester or they simply don't care.
Off subject a bit, but still related to rules that really don't get taken seriously - Speeding, so you get a ticket, the first thing that starts is the arguments regarding what the limit was, how many were overtaking ETC, Grow up folks, you got caught doing it, face up to it and pay for the breaking of the law, it's there for a reason weather you agree or not - the law was broken, you got caught at it so speed your way to pay for the lawless act. The sill panel at either end as one complete panel has strength which whatever opinions exist is a panel that forms an integral load bearing section, it is as such a testable item and it's strength at any 1 given point must not be compromised. The tester manual is the only real way to ascertain how the presented vehicle should be tested. I for one, don't do bent tests, and even if I was testing my car this time (Off Long Term Sick) and stupid enough to ignore the obvious fail item, it would compromise the effect of proper testing, and my integrity. The repair is taking place regardless of opinions on here or anywhere else. I understand that many will argue my point, I don't care one bit why, I have a responsibility and will rely on my experience and knowledge to test accurately and have a clear conscience. The customer is always welcome to dispute any decision made by a tester, and has a period of time to advise DVSA of their argument. In many cases, DVSA will usually side with the customer unless the failed item is obviously dangerous, so the attitude towards testing is strict, through and not compromising the clear bible of rules. The tester manual is open-book, so anybody can read through it and manipulate their own rules from it as they see fit. The templates that I produced were of thin sheet steel, the idea was to give some ideas of how I'd like the repair to be performed without making the sill look like it's obviously been repaired from a kerbside view. |
14th October 2019, 20:47 | #8 | |
Loves to post
Rover 75 Conny Tourer Auto Join Date: Mar 2016
Location: Essex
Posts: 347
Thanks: 75
Thanked 94 Times in 71 Posts
|
Quote:
Sent from my Redmi Note 7 Pro using Tapatalk
__________________
2003 Tourer, Connoisseur Auto |
|
15th October 2019, 16:58 | #9 |
I really should get out more.......
A Reasonably Priced Car Join Date: Jan 2014
Location: Burton Latimer
Posts: 2,530
Thanks: 408
Thanked 1,064 Times in 712 Posts
|
Update on welding to Roger.
Very pleased with this: https://www.dropbox.com/s/r81chl75cv...71931.jpg?dl=0 https://www.dropbox.com/s/6ifuhlnjuy...61545.jpg?dl=0 I'm in no position to quote a price for this work as it was between the boss at GB Rally and myself, but with his workload, I can assure anybody that this firm are always busy, but always happy to help but NEVER charge over the odds for good quality work. |
15th October 2019, 19:02 | #10 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
|
Thread Tools | |
Display Modes | |
|
|