Re entering Radio/CD Security Code

PaulPJ · 25th June 2009, 06:56

Hi Chaps, I did ask this question on the I.C.E Forum but got no replies. I will need to disconnect the battery at some point but I do not have the Manual for the factory fitted Blaupunkt radio/CD player so do not know that needs pressing. Can anyone tell me what I press to reenter the code after a battery diconnect please. Thanks Paul

eskezz · 25th June 2009, 09:34

I have one and have reset the code a couple of times.To reset Page 180 of the owner's handbook says:

1. swith on the radio ('CODE' appears in the dispay followed by 0000).

2.Press pre-set button 1 the required number of times to enter the first digit of the code.

3. Repeat this process using pre set buttons 2,3 and 4 as above.

4.When the full correct code is displayed on the screen then look at the right hand button that says MENU on it and then press the tab directly above this button to store the code. This is a wigwam symbol with a horizontal line above.

You have 3 goes to get it right. If not then 'WAIT 1 H' will appear in the display which means you will have to wait for 1 hour before the word CODE reappears again to restart the coding programme as above. Do NOT switch the unit off during this waiting period.

Hope this helps.

PaulPJ · 25th June 2009, 10:05

Hi Eskezz, thats just what I needed, thank you very much. Paul

25th June 2009, 06:56	#1
PaulPJ Posted a thing or two Rover 75 2.0 Manual Facelift CDTi Contemporary in Starlight Silver Join Date: Oct 2008 Location: New Forest - Hampshire Posts: 1,003 Thanks: 91 Thanked 42 Times in 42 Posts	Re entering Radio/CD Security Code Hi Chaps, I did ask this question on the I.C.E Forum but got no replies. I will need to disconnect the battery at some point but I do not have the Manual for the factory fitted Blaupunkt radio/CD player so do not know that needs pressing. Can anyone tell me what I press to reenter the code after a battery diconnect please. Thanks Paul

25th June 2009, 09:34	#2
eskezz Loves to post rover 75 saloon Join Date: Oct 2008 Location: st helens Posts: 261 Thanks: 0 Thanked 1 Time in 1 Post	I have one and have reset the code a couple of times.To reset Page 180 of the owner's handbook says: 1. swith on the radio ('CODE' appears in the dispay followed by 0000). 2.Press pre-set button 1 the required number of times to enter the first digit of the code. 3. Repeat this process using pre set buttons 2,3 and 4 as above. 4.When the full correct code is displayed on the screen then look at the right hand button that says MENU on it and then press the tab directly above this button to store the code. This is a wigwam symbol with a horizontal line above. You have 3 goes to get it right. If not then 'WAIT 1 H' will appear in the display which means you will have to wait for 1 hour before the word CODE reappears again to restart the coding programme as above. Do NOT switch the unit off during this waiting period. Hope this helps.

25th June 2009, 10:05	#3
PaulPJ Posted a thing or two Rover 75 2.0 Manual Facelift CDTi Contemporary in Starlight Silver Join Date: Oct 2008 Location: New Forest - Hampshire Posts: 1,003 Thanks: 91 Thanked 42 Times in 42 Posts	Hi Eskezz, thats just what I needed, thank you very much. Paul