VIS broken, help!

mantianak · 26th February 2007, 15:54

I've known for a while that my VIS motors are dead!
Lates kindly refered me to the How To link.

After reading it I decided to give it a shot, took the 2 motors off and opened them. I didn't quite understand from the 'how to' if the screws were meant to goto into the plastic switches or simpley push on them. So instead I resoldered the connections and put it all back together.

That worked for a bout a week! I'm guessing those little legs on the switch went again because today the motor was making an unhealthy constant buzzing and prior to this the ride was randomly lumpy (mostly when cold). Also the eninge was really vibrating! I had to pull the plug off from it and drive without, would that cause more or less damage?

Any advice, anyone?

26th February 2007, 15:54	#1
mantianak I really should get out more....... ZT 190+ Saloon Join Date: Nov 2006 Location: Poole Posts: 2,413 Thanks: 6 Thanked 22 Times in 21 Posts	VIS broken, help! I've known for a while that my VIS motors are dead! Lates kindly refered me to the How To link. After reading it I decided to give it a shot, took the 2 motors off and opened them. I didn't quite understand from the 'how to' if the screws were meant to goto into the plastic switches or simpley push on them. So instead I resoldered the connections and put it all back together. That worked for a bout a week! I'm guessing those little legs on the switch went again because today the motor was making an unhealthy constant buzzing and prior to this the ride was randomly lumpy (mostly when cold). Also the eninge was really vibrating! I had to pull the plug off from it and drive without, would that cause more or less damage? Any advice, anyone? __________________ http://i35.photobucket.com/albums/d1..._signature.png