|
||
|
15th October 2014, 18:15 | #1 |
Avid contributor
mini Join Date: Sep 2014
Location: sheffield
Posts: 109
Thanks: 1
Thanked 13 Times in 10 Posts
|
new discs front and rear
i need to put new discs font and rear on my mgzt cdti think ian goin for brembo from rimmers,will i need any other bits other then the pads and shoess
thanks Rimmers are a bit pricey IMO Bremtech/Mtec brakes are very good and I've had them on all my cars. Can be found via ebay or Google. I'd recommend EBC Green Stuff (min) as brake pads but the Red Stuff pads are a lot better but again if you're not a spirited driver at times then they may be overkill. OEM spec pads on the rear is fine. Brembo blanks can be had fairly cheaply from General Traffic so maybe give them a call too Last edited by suzublu; 15th October 2014 at 18:34.. |
15th October 2014, 18:20 | #2 |
Avid contributor
mini Join Date: Sep 2014
Location: sheffield
Posts: 109
Thanks: 1
Thanked 13 Times in 10 Posts
|
disc brakes
i need to fit new discs front and rear to my mg zt cdti will i need any thing else bar for pads and shoes thanks
|
15th October 2014, 18:31 | #3 |
Banned
2004 MG ZT-T 190+ Join Date: Jan 2010
Location: Preston
Posts: 957
Thanks: 97
Thanked 109 Times in 85 Posts
|
Just replied to your other post.
See how your wear sensors are, they're not expensive so might be worth buying anyways... Not sure on what you want to spend but I can highly recommend HEL braided stainless lines also. Make for a much better brake feel etc... |
15th October 2014, 18:32 | #4 |
Avid contributor
mini Join Date: Sep 2014
Location: sheffield
Posts: 109
Thanks: 1
Thanked 13 Times in 10 Posts
|
hi goin for brembo from rimmers
|
15th October 2014, 18:47 | #5 |
Banned
MG ZT V6 190+ Join Date: Sep 2008
Location: Leeds
Posts: 33,223
Thanks: 41
Thanked 1,614 Times in 1,416 Posts
|
Pad wear sensors could be needed if the brake pad light is illuminated. Other than that you seem to be in control.
|
Thread Tools | |
Display Modes | |
|
|