|
||
|
28th February 2022, 09:30 | #11 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,741
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
Hi Richard. You could always take out the ECM and check to see if it as been wet, link blow on how to remove the ECM. https://www.the75andztclub.co.uk/for...d.php?t=281582 A few photos from me below. 1 2 3 press in the tag and slide the clip down. 4 5 move on to the next connector same as above & so on. 6 7 8 9 Then slide out the ECM. 10 11 You can then get the ECM on a work bench in a clean area. 12 flip it over and undo the small torx screws lift the back off. 13 14 Check for any wet area or green/white deposits. 15 Lift the board out and check the other side. 16 17 18 If you do see any deposits you can clean them with switch cleaner only and a soft brush, then some have put it in a warm airing cupboard to dry out, re-fitted it and see if it started. Either way that is how you remove the ECM
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
|
|