BBUS swap using TOAF

neilyh · 15th May 2016, 19:16

Evening all.

Looking to retrofit a mk1 headlight washer setup. Any suggestions on what ZCS coding is needed to swap out the BBUS using TOAF please?

Thanks in advance.

Neil

trikey · 15th May 2016, 21:02

Hope it works as it'll be noisy as hell if it doesn't go right first time!

longer86 · 15th May 2016, 21:12

You dont have to coding zcs,

Just go to bcu coding
Look for alarm and sounder options
You will find there 2 points to setup

In the first one setup third option
And in the second option below, setup fourth option

Sorry but I don't remember exact name of options.

You can try without bbus connected this will guarantee silence during configuring.
After saving configuration. Turn off ignition and try if headlights washer work.

And also check if you remote lock your car and tried to open it from inside. If turn lights will flash.. If yes, then connect bbus and everything should be ok.

Dragrad · 16th May 2016, 01:17

Please note this post....

http://www.the75andztclub.co.uk/foru...4&postcount=31

Kennyeth · 16th May 2016, 05:54

Quote:

Originally Posted by Dragrad

Please note this post....

http://www.the75andztclub.co.uk/foru...4&postcount=31

I have read the link, but you cannot put all the blame for disruption on the Polish guy`s.
Are they now banned ?
Can we still discuss TOAF ??
Back to "square one" arn`t we??
Is anyone else as disappointed as me ??
On a scale of 10 being totally disappointed, I am a 10.
I know now`t about the Xpower thing.
Ken.

coolcat · 16th May 2016, 07:13

Quote:

Originally Posted by Kennyeth

I have read the link, but you cannot put all the blame for disruption on the Polish guy`s.
Are they now banned ?
Can we still discuss TOAF ??
Back to "square one" arn`t we??
Is anyone else as disappointed as me ??
On a scale of 10 being totally disappointed, I am a 10.
I know now`t about the Xpower thing.
Ken.

I'm afraid I'm a 10 on the mightily relieved scale!

There has been massive damage done to the traders on here in loss of revenue etc which considering these guys have been the backbone of this community and pay the club to advertise their services , just isn't fair !

The TOAF guys have been asked time and time again to sign up as traders but have declined to do so, not even going as far as being subscribed members.

They state it is because their product is 'Free' and use the donate facility to say they aren't being paid, but you have to donate to 'unlock certain features'

Most of us recognise that the idea and product is a good thing but certainly not the way they have gone about peddling it out on here.

They have their own forum and they are on Facebook so if anyone wants their product it's still readily available on those platforms .

I think you will find that we run the very real risk of any remaining traders leaving the fold if this type of thing happens again.
It really is a case of 'use them, or lose them'!

rich17865 · 16th May 2016, 08:49

Quote:

Originally Posted by marinabrian

Spoilsport, does that mean I have to become a trader again to find out

Joking aside, I have no problem, and I do mean no problem with TOAF, simply the fact that they were trying to circumvent the trader system on this forum.

There has to be a level playing field for all, and despite the fact that the TOAF chaps seem to think that anyone with a T4 is simply "milking" fellow owners, I don't bear them any malice whatsoever.

I don't need to use TOAF, for any reason personally for obvious reasons, however not everyone is in as fortunate a position as me to have access to T4.

Both systems can (and should) be able to run alongside one another in complete harmony, but there needs to be an attitude change for that to happen

I rather think though that enough has been said on the subject for the time being

Brian

For the peanuts it costs, it is helpful to see all sides of people. Some threads in there would cause havoc if they got out!

marinabrian · 16th May 2016, 08:52

Quote:

Originally Posted by rich17865

For the peanuts it costs, it is helpful to see all sides of people. Some threads in there would cause havoc if they got out!

Yes this is true I do miss the Commercial Members Lounge decor, but I'm quite happy at the moment not being bombarded with a squillion PM's Rich

Brian

murphyv310 · 16th May 2016, 10:47

Quote:

Originally Posted by rich17865

For the peanuts it costs, it is helpful to see all sides of people. Some threads in there would cause havoc if they got out!

There Will be a mad rush of folk paying silver rates for a month for a butcher's!

neilyh · 16th May 2016, 20:14

Blimey - got quite excited when I logged on tonight and saw 3 pages of responses to my initial post - little did I release that WWW3 had broken out (again)

on the back of my post.

Sorry if I have offended any registered traders or long standing members- my post was made in the search for a simple answer....I have made contact with Phil-T4 and will get my BBUS swapped out on the proper manner.

Neil

Quote:

Originally Posted by neilyh

Evening all.

Looking to retrofit a mk1 headlight washer setup. Any suggestions on what ZCS coding is needed to swap out the BBUS using TOAF please?

Thanks in advance.

Neil

15th May 2016, 19:16	#1
neilyh Loves to post MG ZT-T Join Date: Mar 2015 Location: Chelmsford Posts: 284 Thanks: 34 Thanked 58 Times in 46 Posts	BBUS swap using TOAF Evening all. Looking to retrofit a mk1 headlight washer setup. Any suggestions on what ZCS coding is needed to swap out the BBUS using TOAF please? Thanks in advance. Neil __________________ ZT-T CDTI + 135; commission number 849 of 2,795 in MBB Born on 7th July 2003 @ 10.56 Last edited by neilyh; 15th May 2016 at 19:58..

15th May 2016, 21:02	#2
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,783 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	Hope it works as it'll be noisy as hell if it doesn't go right first time! __________________ Lest we forget..

16th May 2016, 01:17	#4
Dragrad This is my second home *None DROWNED** Join Date: Aug 2007 Location: Cardigan Posts: 33,339 Thanks: 1,257 Thanked 1,664 Times in 1,081 Posts	Please note this post.... http://www.the75andztclub.co.uk/foru...4&postcount=31 __________________ Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER...

15th May 2016, 21:12	#3
longer86 Taking time out R75 Join Date: Aug 2013 Location: Poznań Posts: 201 Thanks: 29 Thanked 104 Times in 55 Posts	You dont have to coding zcs, Just go to bcu coding Look for alarm and sounder options You will find there 2 points to setup In the first one setup third option And in the second option below, setup fourth option Sorry but I don't remember exact name of options. You can try without bbus connected this will guarantee silence during configuring. After saving configuration. Turn off ignition and try if headlights washer work. And also check if you remote lock your car and tried to open it from inside. If turn lights will flash.. If yes, then connect bbus and everything should be ok.