|
||
|
4th April 2020, 21:44 | #1 |
Gets stuck in
Rover 75 Connie SE 2.5 V6 Auto Join Date: Aug 2015
Location: Stevenage
Posts: 620
Thanks: 619
Thanked 253 Times in 182 Posts
|
Brake Fluid change, without T4, using the "gravity" method
Hi all
There's been a couple of threads recently re brake fluid bleeding/changing. On MikeTrident's informative "Brake Fluid" thread, Marinabrian posted about a "gravity" bleed method he uses which I'd never come across before. I'd always used the " rubber tube with a split in it, and pump the brake pedal" method on my previous classic cars - no ABS, dual circuit, T4-option modern stuff on any of them! Today provided the opportunity for another "satisfying job whilst on lockdown" and I had a go at the full fluid change using Brian's gravity method. It worked perfectly, so I thought I'd post up a separate thread for anybody who might be interested but perhaps is also unaware of this method, or following the other threads. What I did, and some comments..... Background I've had my current V6 for two years now. I'm not sure of all it's previous service history but I know prior to me, it had sat in a garage back yard for 5 years and not moved. The calipers had been painted red at some time and paint was covering the bleed nipple/caliper joints too, so probably the fluid was much older than 5 years. Here we go 1 . About a week a go I started wirebrushing and PlusGassing all the bleed nipples. 2 . First of all I used a large syringe to take out fluid from the Master Cylinder, down to the bottom of the "neck" of the cylinder, and put fresh in .. just to start the supply of new fluid from the start. 3 . I started with the nearside rear wheel. Jacked up, axle stand in place, more PlusGas/ wirebrushing and, picking up on another tip from a thread, I heated up the caliper for 5 seconds with a small gas blowtorch and squirted the nipple again with PlusGas to cool it down. 4 . Using a snug fitting, hexagonal 9mm socket and a T bar so as to apply even pressure (another thread warned about using an open or ring spanner as the twisting is harder to keep "central"), holding my breath and fretting for a couple of seconds as my twisting effort increased, the nipple came undone rather than snapping off or rounding off. Result! 5 . The same procedure worked for the other three nipples too. I was SO chuffed about this bit. So I highly recommend the PlusGas / wirebrush and gentle heat steps if (like me) you are concerned about the nipples snapping off. 6 . A clear length of tubing was pushed onto the nipple and into a clear container, and loosening the nipple half a turn saw old fluid rising up in the tube and then over the top of the loop. See picture. 7 . The next stage took AGES.... I wasn't expecting fast flowing fluid but it was SOOOOO slow! It probably took an hour and a half for the first half a litre of fluid to end up in the container. Perhaps that's indicative of the age/ thickness / viscosity, I don't know. It did get a tiny bit quicker as (I guess) the new fluid displaced the old but God it was slowww. I can understand why some folk on here use a pressure system to "push" the fluid through.... 8 . As most people will know, the next caliper was offside rear, then nearside front and finally offside front. 9 . Because of the slow draining process you get the chance to do other little jobs. Just had to check the Master Cylinder every 5 minutes and keep it topped up with fresh fluid. 10. The front calipers drained down faster than the rear, so do remember to keep an eye on the Master Cylinder. I didn't let the new fluid level drop anywhere near the "neck" of the cylinder. 11. I can understand that T4 might be needed to get the last 40ml or so out of the ABS bit, but the brake pedal is rock hard so I'm happy (actually, it was good before the change but at least I know the fluid is fresh and I didn't seem to c0ck up anything else!) I've attached a picture of some of the old fluid (plastic container) and new fluid (see the jar next to it) so there's a definite difference in colour. Was the old fluid REALLY bad? ... had it been changed before? What do you think? In summary although very slow, this method is definitely a useful one. But of course if any of the nipples had snapped off I would not feel as smug as I do this evening! Sorry for the long thread ... hope it's useful at some time for someone else. Stay safe folks John
__________________
. My 2.5 V6 Connoisseur SE Auto 75 is the • 20,516th 75 to be made out of 112,381 • 787th 2.5 V6 Connoisseur SE to be made out of 3,671 • 1,248th Wedgwood Blue Metallic (code: JBH) to be made out of 7,515 code JBH 75's |
4th April 2020, 21:55 | #2 |
Gets stuck in
MG ZT-T Join Date: Aug 2015
Location: Barnsley
Posts: 594
Thanks: 233
Thanked 132 Times in 121 Posts
|
Lovely post
|
4th April 2020, 22:00 | #3 |
This is my second home
Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008
Location: Birmingham
Posts: 11,397
Thanks: 6,587
Thanked 2,262 Times in 1,729 Posts
|
Certainly looks wearworn in the rightside container to me.Yes probably got the five year itch.
__________________
Great Barr, Birmingham. |
5th April 2020, 05:54 | #4 |
Trader
ZT 260SE, Connoisseur CDT Join Date: Mar 2009
Location: The Ancient Shire Of Bedlington
Posts: 12,597
Thanks: 68
Thanked 506 Times in 305 Posts
|
I tend to use the gravity method quite a lot as I’m normally working alone when I’m doing these jobs & I find it’s usually very successful with 75/ZTs I have however recently bought a pressure bleeder but not one of those horrible ones you attach to a tyre valve, I hate those things, I bought the type that’s a round pot bellied container with a pump handle on the too
|
5th April 2020, 10:52 | #5 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,935
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
I'm now plus gassing bleed nipples and what a clever idea, put the lid on the jar with a hole big enough for the pipe from the bleed nipple... why did I not think of that?
macafee2 |
5th April 2020, 14:53 | #6 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
It's clearly very slow and therefore easier to manage single-handed, but what advantage does a 'gravity' bleed have over a 'pressure' or 'vacuum' bleed? I can't put my finger on it.
TC |
5th April 2020, 15:01 | #7 | |
Gets stuck in
Rover 75 Connie SE 2.5 V6 Auto Join Date: Aug 2015
Location: Stevenage
Posts: 620
Thanks: 619
Thanked 253 Times in 182 Posts
|
Quote:
Oh ... and when Mr Amazon knocks on the door it saves the wife saying "OMG WHAT have you bought for your car NOW?!" John
__________________
. My 2.5 V6 Connoisseur SE Auto 75 is the • 20,516th 75 to be made out of 112,381 • 787th 2.5 V6 Connoisseur SE to be made out of 3,671 • 1,248th Wedgwood Blue Metallic (code: JBH) to be made out of 7,515 code JBH 75's |
|
5th April 2020, 17:24 | #8 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
|
6th April 2020, 18:42 | #9 |
Gets stuck in
Rover 75 Saloon Join Date: Jan 2010
Location: Preston
Posts: 625
Thanks: 50
Thanked 44 Times in 32 Posts
|
Was it obvious from the colour change when the new fluid had reached each caliper?
How much new fluid did you use? Last edited by Synchromesh; 6th April 2020 at 18:47.. |
6th April 2020, 19:00 | #10 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,935
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
post 13 shows a/the sequence for bleeding
https://www.the75andztclub.co.uk/for...=217015&page=2 macafee2 |
|
|