Cannot load Sat Nav programme.

[wuzerk]

I need some guidance please. I have received my original sat nav card back after Sean arranged for updated maps to be loaded. I cannot load it as I never see iG01834.exe no matter what I try! I follow the set up instructions and see [iG01834] but if I press it I get nothing. If I press [...] it goes back to [storage card] and [NandFlash] and then I go round in circles.
If I see [iG01834] and press 'OK' I get
audio, cars,content,custom,defaults, and extensions but never see iGo1834.EXE. Any ideas as to why?

If I put the sat nav card into my PC and look at mapchanger.exe it says: it is not a valid win32 application if that is a clue?

[Radioguy]

Originally Posted by wuzerk

I need some guidance please. I have received my original sat nav card back after Sean arranged for updated maps to be loaded. I cannot load it as I never see iG01834.exe no matter what I try! I follow the set up instructions and see [iG01834] but if I press it I get nothing. If I press [...] it goes back to [storage card] and [NandFlash] and then I go round in circles.
If I see [iG01834] and press 'OK' I get
audio, cars,content,custom,defaults, and extensions but never see iGo1834.EXE. Any ideas as to why?

Hi Wuzerk Do you see IGO? With the Logo ?

Sean

[wuzerk]

Sean, No, all I see is' cannot find navigation software' as per manual so I follow the procedure and get nowhere.

[Radioguy]

Originally Posted by wuzerk

Sean, No, all I see is' cannot find navigation software' as per manual so I follow the procedure and get nowhere.

Hi Fred

When you do the set up, And you get tho the SD card , Are you able to see the file IGO With the IGO logo

[wuzerk]

On my computer I can see what you have posted but there is no blue icon with iG08.exe. on it, just a blue icon with iG08. This is beneath a blank icon with iG08 as well. There is no .exe

[coolcat]

Hi Fred,

Your card was opening correctly on the unit at work, the only change was in the folder content/maps which had the new maps installed.
Something strange is going on.
I believe you have the Mgr WinCe with old menus, if so might be worth following these two videos to check its installing correctly

http://youtu.be/tXgfsPFKvhU

http://youtu.be/2NOKuydA5KU

[Steve916]

I know I'm a few miles North of you, but if you're travelling this way I don't mind having a look for you.

[wuzerk]

Originally Posted by coolcat

Hi Fred,

Your card was opening correctly on the unit at work, the only change was in the folder content/maps which had the new maps installed.
Something strange is going on.
I believe you have the Mgr WinCe with old menus, if so might be worth following these two videos to check its installing correctly

http://youtu.be/tXgfsPFKvhU

http://youtu.be/2NOKuydA5KU

Thanks for that, it is not how my system appears but it is starting to make some sense. When I try to load on my system I reach the page with audio,
cars, content, custom,defaults, and extension on it but now know that I need to feed that list up until I reach iGo8.exe. I have no idea how to feed the page up! There is an 'OK' button on the right hand side with an
up and down arrow below it but so far it has never fed the page up but I will try again. Thanks

[wuzerk]

SORTED: The arrow did feed the list up one push at a time, found the .exe and away it went. Thankyou Jeff, Sean, and Steve for your help.

[coolcat]

Originally Posted by wuzerk

SORTED: The arrow did feed the list up one push at a time, found the .exe and away it went. Thankyou Jeff, Sean, and Steve for your help.

Phew.....result, glad it's all sorted