MG ZT Memory Seat Program

Stephen wade · 25th June 2017, 18:06

Hi is there anybody that can tell me how I program the memory seat please I've fitted a full leather heated memory seats and don't know how to program the drivers seat to memory can anybody HELP PLEASE Thankyou...

Rooney · 25th June 2017, 18:18

3 memories available.To store positions, key must be in ignition and starter switch must be in position one or two..
Adjust seat to required position - store position by pressing & holding the memory store switch (the switch labelled M that is set slightly apart from the 3 buttons labelled I II or III) and with the M switch still pressed in, press & release switch I II or III, then release the M button, car will sound single chime to confirm stored OK.

Avulon · 26th June 2017, 16:09

Just to add that the memory position is then related to the key used. If the seat is out of position then pressing and holding open on the key before you get in will start the seat moving to the stored position. With two keys you can program one position for you (and your key) and the other for your partner (nominated driver so you can have a pint )

neilll · 26th June 2017, 16:24

The key option is only available on the early cars, the later ones have the boot release option.
Neil

Avulon · 26th June 2017, 17:16

Quote:

Originally Posted by neilll

The key option is only available on the early cars, the later ones have the boot release option.
Neil

Yes I'd forgot about that, having a late early one (2003).

25th June 2017, 18:06	#1
Stephen wade Avid contributor MGZT 190+ Join Date: Jan 2014 Location: South Manchester.Wythenshawe,(Nr-A/Port) Posts: 144 Thanks: 86 Thanked 4 Times in 3 Posts	MG ZT Memory Seat Program Hi is there anybody that can tell me how I program the memory seat please I've fitted a full leather heated memory seats and don't know how to program the drivers seat to memory can anybody HELP PLEASE Thankyou...

26th June 2017, 16:09	#3
Avulon This is my second home 1.8t Tourer Join Date: Oct 2011 Location: Tanelorn Posts: 4,830 Thanks: 956 Thanked 1,148 Times in 916 Posts	Just to add that the memory position is then related to the key used. If the seat is out of position then pressing and holding open on the key before you get in will start the seat moving to the stored position. With two keys you can program one position for you (and your key) and the other for your partner (nominated driver so you can have a pint ) __________________ Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button

25th June 2017, 18:18	#2
Rooney Suspended MG ZT 135+ Rover 75 CDTi Tourer, 75 2.5 V6 Saloon Join Date: Oct 2014 Location: County Antrim Posts: 2,027 Thanks: 835 Thanked 882 Times in 557 Posts	3 memories available.To store positions, key must be in ignition and starter switch must be in position one or two.. Adjust seat to required position - store position by pressing & holding the memory store switch (the switch labelled M that is set slightly apart from the 3 buttons labelled I II or III) and with the M switch still pressed in, press & release switch I II or III, then release the M button, car will sound single chime to confirm stored OK.

26th June 2017, 16:24	#4
neilll Gets stuck in MG ZT,MG ZT-T Join Date: May 2008 Location: St. Helens Posts: 961 Thanks: 211 Thanked 235 Times in 158 Posts	The key option is only available on the early cars, the later ones have the boot release option. Neil