|
||
|
25th June 2017, 15:24 | #1 |
the Old Codger
Rover 75 Saloon Join Date: Feb 2010
Location: Buckley
Posts: 45
Thanks: 16
Thanked 6 Times in 5 Posts
|
Facelift foglamps
I have a pair of fog lamps for my 75 including all the wiring & wiring diagram but there are no fixing brackets for the bumper. Has anyone any idea how they can be obtained.
|
25th June 2017, 15:39 | #2 |
Posted a thing or two
Rover 75 CDTi Classic saloon, MGB GT, Skoda Yeti Join Date: Aug 2008
Location: Ramsey, Cambs
Posts: 1,874
Thanks: 626
Thanked 635 Times in 430 Posts
|
There should be three lugs/brackets on the fog lamp moulding that screws go through to go into holes in a support bracket already in the back of the bumper - do you not have these ? When I fitted mine, I did not need any brackets.
Pete |
25th June 2017, 16:48 | #3 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,893
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
As EastPete says.
macafee2 |
25th June 2017, 17:21 | #4 |
the Old Codger
Rover 75 Saloon Join Date: Feb 2010
Location: Buckley
Posts: 45
Thanks: 16
Thanked 6 Times in 5 Posts
|
Facelift fog lamps
Thanks for the info. I'll have a look again on the bumper.
When I first tried to fit them there was a projection fitted to the bumper but the fog lamps didn't fit the holes exactly & the fog lamps didn't fit tightly into the bumper. My other car a 45 has a separate bracket to fit the foglamps into which then attaches to the bumper |
25th June 2017, 17:55 | #5 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,751
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
Are the lamps the Mk2 type or the Mk1? They're slightly different.
TC |
25th June 2017, 21:06 | #6 |
the Old Codger
Rover 75 Saloon Join Date: Feb 2010
Location: Buckley
Posts: 45
Thanks: 16
Thanked 6 Times in 5 Posts
|
Fog Lamps
I bought them on Ebay as facelift ones. The wiring diagram has a sketch of the face lift bumper. I will check again during the week. many thanks to all for your comments
|
25th June 2017, 23:09 | #7 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,751
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
The beam height adjuster is positioned differently on Mk1 and Mk2 lamps, which means the Mk1 lamps foul the mounting bracket on a Mk2 bumper. They can be made to fit if necesary by cutting a bit of the bracket away. Hopefully you'll not need to do that.
TC |
Thread Tools | |
Display Modes | |
|
|