Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 22nd June 2019, 18:14   #1
tworodrod
Newbie
 
tworodrod's Avatar
 
Rover 75 saloon

Join Date: May 2019
Location: tyldesley
Posts: 23
Thanks: 17
Thanked 0 Times in 0 Posts
Default kv6 under tray

Hi all question is there a diagram were the fixing screws should be as I came to take mine off this afternoon and it was fixed with self tappers [12) nuts and bolts (5) numerous cable ties and bits of twisted wire on seeing this I ordered a new set of fixings but I want to be sure were they go many thanks Rod
tworodrod is offline   Reply With Quote
Old 23rd June 2019, 00:42   #2
Rich in Vancouver
Gets stuck in
 
Rich in Vancouver's Avatar
 
MG ZT-T

Join Date: Jun 2016
Location: White Rock, BC on Canada's Pacific Coast
Posts: 844
Thanks: 338
Thanked 367 Times in 210 Posts
Default

I just had mine off today. Mine was only missing two, with one of them secured with a wire tie.
4 in the front, 2 at the front of the suspension mounts, 2 at the rear of the suspension mounts, and 2 at the tips of the tails at the back.
__________________
ZT-T190, Anthracite, LHD, Left the Line on June 24, 2002,
Sold new in Switzerland, spent time in Germany, Imported to Canada in September 2021
Rich in Vancouver is offline   Reply With Quote
Old 23rd June 2019, 06:59   #3
tworodrod
Newbie
 
tworodrod's Avatar
 
Rover 75 saloon

Join Date: May 2019
Location: tyldesley
Posts: 23
Thanks: 17
Thanked 0 Times in 0 Posts
Thumbs up

Thanks very much for that Rich I can see were they go at the front but the previous owner has put that many fixings in I was not sure which were the right ones when my new screws and clips. arrive I will follow what you say many thanks Rod
tworodrod is offline   Reply With Quote
Old 23rd June 2019, 12:15   #4
Blink
Posted a thing or two
 
Blink's Avatar
 
Rover 75 Saloon

Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
Default

Quote:
Originally Posted by tworodrod View Post
Hi all question is there a diagram were the fixing screws should be as I came to take mine off this afternoon and it was fixed with self tappers [12) nuts and bolts (5) numerous cable ties and bits of twisted wire on seeing this I ordered a new set of fixings but I want to be sure were they go many thanks Rod
As Rich says, there should be 10 altogether (4 at the front plus three pairs) - they're all visible in this pic: https://rimmerbros.com/Item--i-KRB000380
Blink is offline   Reply With Quote
Old 24th June 2019, 06:47   #5
tworodrod
Newbie
 
tworodrod's Avatar
 
Rover 75 saloon

Join Date: May 2019
Location: tyldesley
Posts: 23
Thanks: 17
Thanked 0 Times in 0 Posts
Default

thanks very much for that BLINK looking at the link it seems i might need a replacement under tray has i seem to have a lot more holes than the one showed thanks again Rod
tworodrod is offline   Reply With Quote
Old 24th June 2019, 08:25   #6
vitesse
I really should get out more.......
 
Rover 75 Saloon

Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
Default

There are new Polish ones on ebay https://www.ebay.co.uk/itm/ROVER-75-...oAAOSwsotamCC3 a local member bought a new undertray recently, possibly same and had to re-adjust some of the holes.

Hampson Composites http://www.hampson-composites.co.uk/pages/home.htm OEM, had some themselves, don't know if they've all gone but I'd contact them first before sourcing elsewhere.

Note the Polish site claims to have sold 230+ of these, perhaps too small a volume for Hampson to be interested.

Regards
vitesse is offline   Reply With Quote
Old 24th June 2019, 10:21   #7
ricebridge
Avid contributor
 
ricebridge's Avatar
 
MG ZT-T

Join Date: Oct 2018
Location: Bankeryd, Sweden
Posts: 100
Thanks: 61
Thanked 11 Times in 10 Posts
Default

Do you need one at all?
ricebridge is offline   Reply With Quote
Old 24th June 2019, 11:24   #8
Blink
Posted a thing or two
 
Blink's Avatar
 
Rover 75 Saloon

Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
Default

Quote:
Originally Posted by vitesse View Post
There are new Polish ones on ebay https://www.ebay.co.uk/itm/ROVER-75-...oAAOSwsotamCC3 a local member bought a new undertray recently, possibly same and had to re-adjust some of the holes.

Hampson Composites http://www.hampson-composites.co.uk/pages/home.htm OEM, had some themselves, don't know if they've all gone but I'd contact them first before sourcing elsewhere.

Note the Polish site claims to have sold 230+ of these, perhaps too small a volume for Hampson to be interested.

Regards
There are some poor reviews of the eBay one (wrong shape, holes in wrong place, no heat shield, no sound deadening, etc.) and I'd be surprised if the material is as thick as the original part.

I've emailed Hampson.



PS. There's another one here from a UK supplier - https://www.ebay.co.uk/itm/322858706219 - it appears to be the same as the Polish one.
"ROVE 25 FLORIMEX" is pressed into it. (25, not 75 )

Last edited by Blink; 24th June 2019 at 11:46..
Blink is offline   Reply With Quote
Old 24th June 2019, 11:47   #9
Blink
Posted a thing or two
 
Blink's Avatar
 
Rover 75 Saloon

Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
Default

Quote:
Originally Posted by ricebridge View Post
Do you need one at all?
It keeps the engine bay dry.
Blink is offline   Reply With Quote
Old 24th June 2019, 11:50   #10
Blink
Posted a thing or two
 
Blink's Avatar
 
Rover 75 Saloon

Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
Default

Florimex website - http://www.florimex.pl/en/

http://www.florimex.pl/en/products/3...od-silnik.html
Blink is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 17:55.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd