|
||
|
13th June 2007, 04:16 | #1 |
Regular poster
Rover 75 Connoisseur Join Date: Apr 2007
Location: Hong Kong
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
|
VIS motor parts number wanted
I'm looking for a replacement of VIS motor (actuator 2). Just checked the EPC and found there is three numbers shown and also same description described as below.
MKE100100 Motor assembly multi point injection/TBI balance balve motor MKE100102 same description as above MKE100110 same descrription as above I'm confused as not sure which one is the right for my R75 2.5V6 con. Autogear, petrol, year 1999. Anyone could help ? Also how much cost ? Thanks !
__________________
[SIGPIC][/SIGPIC]Rover 75 HK owner |
13th June 2007, 06:48 | #2 |
I really should get out more.......
ZT 190+ Saloon Join Date: Nov 2006
Location: Poole
Posts: 2,413
Thanks: 6
Thanked 22 Times in 21 Posts
|
I replaced both of the motors on mine. I ordered it from xpart over the phone so at the time I had no idea of the part number. When I got the part I noticed the P/N on the old units were different to that on the new units only they were identical.
I made a note of the new parts which I now have fitted and work KV6 2.0/2.5 VIS MKE100102 - Motor assembly multi point injection/TBI (VIS motor unit, the one on the top) MKE100110 - Motor Assy-MPI/TBI (VIS motor unit, the one on the back/side) Hope this helps
__________________
http://i35.photobucket.com/albums/d1..._signature.png |
13th June 2007, 08:25 | #3 |
Regular poster
Rover 75 Connoisseur Join Date: Apr 2007
Location: Hong Kong
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks !
The OBD shown "Variable intake manifold actuator 2 always opened" I'm wondering actuator 2 is either "Balance valve actuator" or "Power valve actuator" ? I do not want to replace both of them at the moment and so, I have to make sure which one should need replacement. I have to make sure the right parts no. for order because I place the order not in UK as I living in Hong Kong. Thanks for help !
__________________
[SIGPIC][/SIGPIC]Rover 75 HK owner |
13th June 2007, 10:18 | #4 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
That mean one of the Micro Switches is faulty or has come unsoldered
Before buying a new one follow the Vis Howto for instruction as they can easily be repaired |
|
|