EZ-Cool Gauge - Wiring help?

[TomRS]

Morning all,

Was just wondering if anyone had a wiring guide for the EZ-Cool gauge? i have just swapped one into the wife's ZT and i have ZERO idea where it goes.

Its Got a "bus" "gnd" and "12v" the second two are self explanatory, i want an ignition live and a ground.

But which wire does the "bus" attach into?


Thanks for any help!

[hrissim]

Originally Posted by TomRS

Morning all,

Was just wondering if anyone had a wiring guide for the EZ-Cool gauge? i have just swapped one into the wife's ZT and i have ZERO idea where it goes.

Its Got a "bus" "gnd" and "12v" the second two are self explanatory, i want an ignition live and a ground.

But which wire does the "bus" attach into?


Thanks for any help!

Usually the Ground is Black, the Positive is Red, so the other one you have to solder to WRY /White Red Yellow/ K-bus cable.

[TomRS]

Originally Posted by hrissim

Usually the Ground is Black, the Positive is Red, so the other one you have to solder to WRY /White Red Yellow/ K-bus cable.

Yes mate 12V and GND i have sorted already, but the K-Bus side of things im unsure where it goes on the loom.
Any pictures of the wire i need to splice into?

[hrissim]

Originally Posted by TomRS

Yes mate 12V and GND i have sorted already, but the K-Bus side of things im unsure where it goes on the loom.
Any pictures of the wire i need to splice into?

Unfortunately I`m with LHD cars
Take a look at the big, major looms with a lot of cables - there is for sure WRY K-bus cable within as this one goes to everywhere in the car.
I soldered mine with the one near /in left in my case/ the base of the clutch pedal /brake pedal on the other automat car/.
In the very left corner presume right corner in your case.