Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar
Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11th July 2018, 10:47   #1
JeffD
Loves to post
 
Rover 75 1.8T SE

Join Date: Apr 2011
Location: Southport
Posts: 402
Thanks: 1
Thanked 72 Times in 37 Posts
Default 2003 Mk1 Parking Aid Not Working - what next????

About a couple of months ago my parking aid system started playing up. At first it would do the repeating beep whether you were near something or not then it moved to just one long continuous beep whenever in reverse.

Just because it was cheap and to rule it out I replaced the reverse switch in the front wheel well. BTW Reverse lights work perfectly so no doubts in that area.

After a read on here I listened carefully to each sensor in turn and sure enough one of them didn't make the tick, tick noise so bought a replacement on ebay here:

https://www.ebay.co.uk/itm/151104860135

which I painted and fitted using as light a coat of paint as I dare.

After fitting the sensor all sensors including the new one tick, ticked but whenever in reverse I get nothing at all. Tried swapping the od sensor back and it goes to a continuous tone.

Next step I replaced the wiring loom between the sensors and the plug on the body work in the centre of the boot opening part# YMV000040. No difference :-(

Next replaced the ECU part# YWC107190 - again no difference.

Checked the F12 fuse in the passenger compartment footwell and all good.

If I leave the lights on and pull the keys out I get the bing, bing warning (think I read they share same speaker/sounder and noise comes from near IPC)

Not sure where to go next...any ideas?

BTW when I first put car in reverse and switch ignition on I can hear what sounds like a grandfather clock gentle ticking noise just by the rear driver's side wheel which I guess is a relay doing the initial test????

Quick recap...

Reverse switch in front wheel arch replaced - reverse lights work fine.

Replaced non ticking sensor with new ebay sensor - all sensors tick when in reverse

Replaced wiring loom between actual sensors and bodywork with no difference

Replaced ecu with no difference

Parking system makes no noise at all at any time (apart from the tick from the sensors and a tick/tock in the rear drivers side wing)
JeffD is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 00:39.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd