18" zt alloys (ebay)

Tam · 18th October 2009, 12:18

seem cheap to me £80 ? but pick up . http://cgi.ebay.co.uk/4-MG-ZT-ROVER-...item1e58c2a144

pab · 18th October 2009, 12:25

very cheap..bargain to be had there.

Greeners · 18th October 2009, 12:30

Quote:

Originally Posted by tammyboy

seem cheap to me £80 ? but pick up . http://cgi.ebay.co.uk/4-MG-ZT-ROVER-...item1e58c2a144

I'm sure someone local could collect if required....

ceedy · 18th October 2009, 12:47

I would like just one for a full size spare !!

Tam · 18th October 2009, 13:02

I could afford the rims but not the tyres so no good to me but must be perfect for someone ? Mind you a lot of members may be a bit busy today ! .

uk_dave&gill · 18th October 2009, 13:13

Would these be a straight swap on to a Rover 75?

Quite fancy a change!

Guessing the rolling radius would be the same, so wouldn't affect speedo? Or am I wrong?

pab · 18th October 2009, 13:41

Quote:

Originally Posted by uk_dave&gill

Would these be a straight swap on to a Rover 75?

Quite fancy a change!

Guessing the rolling radius would be the same, so wouldn't affect speedo? Or am I wrong?

yes..straight swap,the tyres can be a bit expensive,unless a set of budget tyres would suit.the speedometer with the correct ratio tyre would not be effected

uk_dave&gill · 18th October 2009, 13:55

Blimey - just Googled and I see what you mean!

Average cost is around £150 a corner, so the "cheap" alloys would set me back around £680!

(OK, you can get budgets for around £80, but that's still £400 all in, so looks like I may not be bothering after all! Never mind!)

pab · 18th October 2009, 14:00

Quote:

Originally Posted by uk_dave&gill

Blimey - just Googled and I see what you mean!

Average cost is around £150 a corner, so the "cheap" alloys would set me back around £680!

(OK, you can get budgets for around £80, but that's still £400 all in, so looks like I may not be bothering after all! Never mind!)

thats why it's nice to buy a set with half decent tyres..then you can budget on a new set

uk_dave&gill · 18th October 2009, 14:14

Quote:

Originally Posted by pab

thats why it's nice to buy a set with half decent tyres..then you can budget on a new set

That's what I was thinking - at least you'd be able to get them on the car and then replace one by one as and when you needed to!

Shame.........

18th October 2009, 12:18	#1
Tam Posted a thing or two 05 ZT+, 04 ZT+, 64 P6 2.0, 74 P6 V8s, 75 P6 V8, 92 214Si, 04 25 Td, 02 Defend , 05 ZR 105+ x2 Join Date: Dec 2008 Location: Kirriemuir Posts: 1,319 Thanks: 701 Thanked 203 Times in 136 Posts	18" zt alloys (ebay) seem cheap to me £80 ? but pick up . http://cgi.ebay.co.uk/4-MG-ZT-ROVER-...item1e58c2a144 __________________ Lagoon, last one built! And Horizon 1 of only 2!....MY CARS

18th October 2009, 12:47	#4
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,092 Thanks: 916 Thanked 1,214 Times in 768 Posts	I would like just one for a full size spare !! __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's

18th October 2009, 13:02	#5
Tam Posted a thing or two 05 ZT+, 04 ZT+, 64 P6 2.0, 74 P6 V8s, 75 P6 V8, 92 214Si, 04 25 Td, 02 Defend , 05 ZR 105+ x2 Join Date: Dec 2008 Location: Kirriemuir Posts: 1,319 Thanks: 701 Thanked 203 Times in 136 Posts	I could afford the rims but not the tyres so no good to me but must be perfect for someone ? Mind you a lot of members may be a bit busy today ! . __________________ Lagoon, last one built! And Horizon 1 of only 2!....MY CARS

18th October 2009, 13:13	#6
uk_dave&gill This is my second home .. Join Date: Feb 2007 Location: Town Posts: 4,166 Thanks: 1 Thanked 189 Times in 105 Posts	Would these be a straight swap on to a Rover 75? Quite fancy a change! Guessing the rolling radius would be the same, so wouldn't affect speedo? Or am I wrong? __________________ Dave

18th October 2009, 13:55	#8
uk_dave&gill This is my second home .. Join Date: Feb 2007 Location: Town Posts: 4,166 Thanks: 1 Thanked 189 Times in 105 Posts	Blimey - just Googled and I see what you mean! Average cost is around £150 a corner, so the "cheap" alloys would set me back around £680! (OK, you can get budgets for around £80, but that's still £400 all in, so looks like I may not be bothering after all! Never mind!) __________________ Dave

18th October 2009, 12:25	#2
pab Banned MG ZT V6 190+ Join Date: Sep 2008 Location: Leeds Posts: 33,223 Thanks: 41 Thanked 1,614 Times in 1,416 Posts	very cheap..bargain to be had there.