MG ZTT CDTI - Pull away squeek?

Jack of hearts · 30th June 2009, 19:06

HI Guys,

Ive done a search and it appears not to have been answered before so here goes.

When i pull away in the zt it makes the oddist groan/squeek until it gets going. It only does it if you pull away in anything other than a very slow pace. First thoughts was maybe a engine mount/stabiliser?

Common problem? Or any ideas?

Thanks in advance

JOH

Phil · 30th June 2009, 21:43

Quote:

Originally Posted by Jack of hearts

HI Guys,

Ive done a search and it appears not to have been answered before so here goes.

When i pull away in the zt it makes the oddist groan/squeek until it gets going. It only does it if you pull away in anything other than a very slow pace. First thoughts was maybe a engine mount/stabiliser?

Common problem? Or any ideas?

Thanks in advance

JOH

It could be the clutch plate without the springs fitted around 2004?

Jack of hearts · 1st July 2009, 18:06

Quote:

Originally Posted by Phil

It could be the clutch plate without the springs fitted around 2004?

as it happens my ztt is on a 04 plate.

do the cdti's have a dual mass fly?

Tatts · 1st July 2009, 18:11

Have a read of this.

Then check your VIN, see if it's in range.

30th June 2009, 19:06	#1
Jack of hearts Avid contributor MG ZTT Cdti Join Date: May 2009 Location: Washington Posts: 121 Thanks: 0 Thanked 0 Times in 0 Posts	MG ZTT CDTI - Pull away squeek? HI Guys, Ive done a search and it appears not to have been answered before so here goes. When i pull away in the zt it makes the oddist groan/squeek until it gets going. It only does it if you pull away in anything other than a very slow pace. First thoughts was maybe a engine mount/stabiliser? Common problem? Or any ideas? Thanks in advance JOH

1st July 2009, 18:11	#4
Tatts This is my second home MG6 TL Join Date: Nov 2006 Location: Tarn Posts: 5,269 Thanks: 2 Thanked 46 Times in 37 Posts	Have a read of this. Then check your VIN, see if it's in range. __________________ http://www.wcgsig.com/115562.gif