Faulty Injectors - synergy 2 - Barnsley - Page 5

DazBat · 29th December 2009, 10:25

Hope you all had a good christmas!

I have an MG ZT diesel which I have tried to install a synergy 2, on installation the engine ran rough and smoked a lot!.

Bigruss put the T4 on it and found the the cylinders were out of balance (MAF was ok)

cylinder 2 +2.4
1+3 around -1.5
cylinder 4 @ 0.

Could this cause the synergy not to work, or make the balancing issue worse ? Without the synergy fitted the engine runs smooth.

Assuming the injectors are the issue, does anyone know of a good place to get my injectors tested in the Barnsley area, I have spoke with Johndotcom who can sort me out with a new set of injectors, need someone who could test and fit a new set.

Cheers !

29th December 2009, 10:25	#1
DazBat Newbie 2006 MG ZT 2.0D Join Date: Nov 2009 Location: Barnsley Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts	Faulty Injectors - synergy 2 - Barnsley Hope you all had a good christmas! I have an MG ZT diesel which I have tried to install a synergy 2, on installation the engine ran rough and smoked a lot!. Bigruss put the T4 on it and found the the cylinders were out of balance (MAF was ok) cylinder 2 +2.4 1+3 around -1.5 cylinder 4 @ 0. Could this cause the synergy not to work, or make the balancing issue worse ? Without the synergy fitted the engine runs smooth. Assuming the injectors are the issue, does anyone know of a good place to get my injectors tested in the Barnsley area, I have spoke with Johndotcom who can sort me out with a new set of injectors, need someone who could test and fit a new set. Cheers !