|
||
|
9th November 2019, 14:20 | #1 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,891
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
How to read this multi meter
I'm sure I'm going to get humiliated for being stupid but it is a risk I have to take because right now, I don't have a clue.
There are 3 pictures below, the instructions and 2 readings both of the same thing but with the multi meter set to different scales. What on earth are the ohms reading in the two pictures where different scales have been selected? Although the readings are of the same thing, the readings could be different as it was saliva on my finger but nevertheless how many ohms is each one? If the scale selected had been 200 and I had a reading of .5 how many ohms would it be? Also from the instructions what does resolution mean? Increment? macafee2 |
9th November 2019, 15:24 | #2 |
Posted a thing or two
V6 2ltr auto in copperleaf +CDTI Auto in Royal Blue on loan to Son Join Date: Jul 2010
Location: Tewkesbury, Gloucestershire
Posts: 1,707
Thanks: 105
Thanked 476 Times in 267 Posts
|
200k scale reading is 117600 ohms
2meg scale reading is 412000 ohms Resolution is the smallest value each scale will indicate. As the scale has 4 digits the last digit (on the right)is the resolution. For example on the 200 ohm range a reading of 100.1 is 100.1 ohms. The figure will only change by 0.1 ohms as shown in your first image.
__________________
|
9th November 2019, 16:17 | #3 | |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,891
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
Quote:
once more question If the scale selected had been 200 and I had a reading of .5 how many ohms would it be? 5? when did resolution become increment? macafee2 |
|
9th November 2019, 16:36 | #4 | |
Posted a thing or two
V6 2ltr auto in copperleaf +CDTI Auto in Royal Blue on loan to Son Join Date: Jul 2010
Location: Tewkesbury, Gloucestershire
Posts: 1,707
Thanks: 105
Thanked 476 Times in 267 Posts
|
Quote:
As the meter reads 0.1 increments on that range i.e it will only read 0.1, 0.2 etc then that is also the lowest resolution of the meter.
__________________
Last edited by dattrike; 9th November 2019 at 16:39.. |
|
9th November 2019, 16:43 | #5 | |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,270
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Quote:
You'll note that the 200 ohm range can display tenths of an ohm. It will therefore show a decimal point and you will get a reading of whole ohms and tenths of an ohm. The kilohm ranges, for example 200k, will show readings in kohms. For example 150kohms will be displayed as 150 and will only change every 100 ohms. So the next highest possible reading would be 150,100 ohms or 150.1 on the display. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. Last edited by SD1too; 10th November 2019 at 08:29.. Reason: Removed 'only' from the second sentence. |
|
9th November 2019, 16:53 | #6 | |
Posted a thing or two
V6 2ltr auto in copperleaf +CDTI Auto in Royal Blue on loan to Son Join Date: Jul 2010
Location: Tewkesbury, Gloucestershire
Posts: 1,707
Thanks: 105
Thanked 476 Times in 267 Posts
|
Quote:
__________________
|
|
9th November 2019, 16:56 | #7 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,270
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Sorry for jumping in on your replies David. I thought that you were off-line at the time and that Ian might be waiting for an answer. Then we both ended up typing at the same time and unaware of that. I'm glad that you like my wording, thank you!
Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
9th November 2019, 19:51 | #8 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,891
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
I am going to have to write this down so I don't forget. Thank you for the explanations I do appreciate it.
I may have to resurrect this thread at some point, when I measure via the 200meg, 20k and 2k ranges macafee2 |
10th November 2019, 08:46 | #9 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,270
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
The highest range you have Ian is 2MΩ but you're extremely unlikely to need that in automotive fault finding! Any reading in the megohm range will suggest an open, or break in the path you're measuring.
For continuity checks, use the 200Ω range. You're looking for a reading very close to zero. Remember that when measuring resistance, the car battery should be disconnected and the circuit you are measuring should be broken. In other words, when checking the resistance of the automatic gearbox solenoid valves, the connector must be separated first. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
10th November 2019, 08:55 | #10 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,891
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
not sure why trying to understand the readings has blown my mind.
I should have stuck with my old meter with a needle macafee2 |
Thread Tools | |
Display Modes | |
|
|