|
||
|
25th December 2016, 19:29 | #1 |
Avid contributor
MG ZT-T, R75 1.8T Tourer,R75 2,5 V6 Join Date: Sep 2016
Location: Bergen
Posts: 170
Thanks: 77
Thanked 21 Times in 18 Posts
|
Tourer Boot handel screws/bolts=
Hi guys!
The handle on my bootlid is cracked and used up..Gonna remove it and replace with a new one I got a hold of,but what kinda tool do I need..?Never seen these kinda screws before.. Merry X Mas.. |
27th December 2016, 15:28 | #2 |
Precise
Rover 75 Tourer 2.5KV6 Connoisseur SE Join Date: Mar 2013
Location: Fleet
Posts: 2,937
Thanks: 630
Thanked 617 Times in 480 Posts
|
They are Torx Pinhead security screws. Just need the right size torx driver. the one with the hole in the middle to clear the pin.
Standard driver in those little blue plastic boxes with all types of security drivers http://www.ebay.co.uk/itm/New-33PC-S...-/26248http:// |
27th December 2016, 20:16 | #3 |
Loves to post
Rover 75 CDTi Tourer Connoisseur SE Auto, Also fully restored Mk 2 1966 MG Midget Join Date: Apr 2007
Location: Manchester
Posts: 314
Thanks: 49
Thanked 59 Times in 46 Posts
|
[/ur[/IMG]
I could not access the previous link.This is what it looks like. Its a Torx25H bits - The bit in the holder is a size 40 to illustrate better what it looks like. The loose one on the left above is the actual size 25. The bit sizes with my set go T-10H, 15, 20, 25, 30 and the 40. The holder/lever arm is about 4 inches long with bit holders at both ends allowing for short and long leverage. The whole set goes into a belt clip. /www.the75andztclub.co.uk/forum/vbimghost.php?do=displayimg&imgid=23419'][/url] Last edited by GeoffWW; 27th December 2016 at 21:05.. Reason: Additions |
Thread Tools | |
Display Modes | |
|
|