Best MAF Supplier

Stephen Palmer · 17th June 2011, 18:54

This question will have been asked before but as i now know that the maf is up the spout where is the best place to get a original one from don't want a useless copy.
My car has a mafam fitted but as i have no way of knowing if that was part of the problem was thinking of getting a bosch one then i am not left with the problem of new maf and still needing to buy a synergy box to make it work.
Thanks to all on the technical forum that helped send me in the right direction.

fse73549 · 17th June 2011, 20:10

Try the following link it's where mine came from.

http://www.worldcarparts.co.uk/tabid...2/Default.aspx

Arctic · 18th June 2011, 00:45

Hi
Try these
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

Also check out this link below.
http://www.the75andztclub.co.uk/foru...ad.php?t=85007

kissifer1972 · 18th June 2011, 06:50

Quote:

Originally Posted by fse73549

Try the following link it's where mine came from.

http://www.worldcarparts.co.uk/tabid...2/Default.aspx

This is NOT the MAF for the M47r, it is for the VW. It will work, but run 4% rich which means in a year at 10k miles it would cost you around a tank of diesel, which coincidentally is about the same as it would cost you extra to buy the correct MAF. Bosch do not supply the sensor only for the M47, only supplied with the body as here http://www.worldcarparts.co.uk/CarPa...0/Default.aspx

These look genuine on eBay
http://cgi.ebay.co.uk/NEW-GENUINE-BO...-/170619473592

So you should expect to pay around £165 for a GENUINE correct part for the M47R

Chris

Arctic · 18th June 2011, 09:51

Hi stephen.
have a good read of the link i put up before you buy anything at all best to safe than sorry.

http://www.the75andztclub.co.uk/foru...ad.php?t=85007

Stephen Palmer · 18th June 2011, 19:31

Thanks for the help and advice all after reading the other posts have decided to get the bosch one off world car parts, looks like the one to fit our cars comes with the housing, bit more than i wanted to pay but if it makes it run correctly

Thanks all

kissifer1972 · 18th June 2011, 22:16

Stephen, just out of interest, have you tried cleaning your MAF?

Have you run the car with the MAF unplugged? Did it run better with it unplugged?

A lot think the MAF is out when it isn't. I did, until Russ had it on the T4 and it was fine.

Chris

Stephen Palmer · 19th June 2011, 19:35

Runs much much better with the maf disconnected, when it started playing up it would die then pull again then die, got worse when it got warm.

spyder · 19th June 2011, 19:46

I cleaned mine with electrical cleaner, as Chris suggested, and it did make a difference. Since put a synergy on, and even on 1 it is a different car. Ie much better.

Stephen Palmer · 19th June 2011, 19:48

Thanks for that will try cleaning it tomorrow.

17th June 2011, 18:54	#1
Stephen Palmer Regular poster MGZT-T Join Date: Mar 2011 Location: Maryport Posts: 63 Thanks: 1 Thanked 0 Times in 0 Posts	Best MAF Supplier This question will have been asked before but as i now know that the maf is up the spout where is the best place to get a original one from don't want a useless copy. My car has a mafam fitted but as i have no way of knowing if that was part of the problem was thinking of getting a bosch one then i am not left with the problem of new maf and still needing to buy a synergy box to make it work. Thanks to all on the technical forum that helped send me in the right direction.

18th June 2011, 00:45	#3
Arctic Give to Learn Freelander 2 Join Date: Aug 2010 Location: West Midlands Posts: 18,735 Thanks: 1,155 Thanked 6,407 Times in 3,874 Posts	Hi Try these http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT Also check out this link below. http://www.the75andztclub.co.uk/foru...ad.php?t=85007 __________________ Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise "

18th June 2011, 09:51	#5
Arctic Give to Learn Freelander 2 Join Date: Aug 2010 Location: West Midlands Posts: 18,735 Thanks: 1,155 Thanked 6,407 Times in 3,874 Posts	Hi stephen. have a good read of the link i put up before you buy anything at all best to safe than sorry. http://www.the75andztclub.co.uk/foru...ad.php?t=85007 __________________ Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise "

18th June 2011, 22:16	#7
kissifer1972 Posted a thing or two Rover 75 CDTi Conn Tourer & Rover 75 CDT Conn SE Saloon Join Date: May 2010 Location: Queensbury Posts: 1,368 Thanks: 0 Thanked 1 Time in 1 Post	Stephen, just out of interest, have you tried cleaning your MAF? Have you run the car with the MAF unplugged? Did it run better with it unplugged? A lot think the MAF is out when it isn't. I did, until Russ had it on the T4 and it was fine. Chris __________________ Mods so far X-Power Performance Upgrade LED interior lights and sidelights Genuine Rover Xenons - now removed and sold Kenlowe fan Synergy 2 EGR Bypass

19th June 2011, 19:46	#9
spyder This is my second home 75 CDT Auto Tourer , Rover 45 , Astra, Zaffira, Chev Captiva Join Date: Mar 2011 Location: Wilts Posts: 3,342 Thanks: 203 Thanked 436 Times in 360 Posts	I cleaned mine with electrical cleaner, as Chris suggested, and it did make a difference. Since put a synergy on, and even on 1 it is a different car. Ie much better. __________________ Chrome skull caps, EGR cleaned (original housing), Mondeo lower mounting, 12V outlets in the armrest and tourer boot, cat fixed, working FBH, Lidl plenum covers, DD with reverse camera.New speakesr/Tweeters with MDF rings. wood dash, Memory leather seats, wooden finished steering and handbrake, Xenon headlights.

17th June 2011, 20:10	#2
fse73549 The Best Car In The World Rover 75 Connie se Tourer Join Date: Aug 2009 Location: Bolton Posts: 215 Thanks: 1 Thanked 1 Time in 1 Post	Try the following link it's where mine came from. http://www.worldcarparts.co.uk/tabid...2/Default.aspx

18th June 2011, 19:31	#6
Stephen Palmer Regular poster MGZT-T Join Date: Mar 2011 Location: Maryport Posts: 63 Thanks: 1 Thanked 0 Times in 0 Posts	Thanks for the help and advice all after reading the other posts have decided to get the bosch one off world car parts, looks like the one to fit our cars comes with the housing, bit more than i wanted to pay but if it makes it run correctly Thanks all

19th June 2011, 19:35	#8
Stephen Palmer Regular poster MGZT-T Join Date: Mar 2011 Location: Maryport Posts: 63 Thanks: 1 Thanked 0 Times in 0 Posts	Runs much much better with the maf disconnected, when it started playing up it would die then pull again then die, got worse when it got warm.

19th June 2011, 19:48	#10
Stephen Palmer Regular poster MGZT-T Join Date: Mar 2011 Location: Maryport Posts: 63 Thanks: 1 Thanked 0 Times in 0 Posts	Thanks for that will try cleaning it tomorrow.