Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar
Notices

Reply
 
Thread Tools Display Modes
Old 25th January 2024, 17:50   #1
Cristian0308
Newbie
 
Rover 75

Join Date: Jul 2023
Location: Toledo
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Traction control fault Rover 75/MG ZT DIESEL 2.0 CDTI

Good afternoon. I have a problem with my Rover 75 diesel. I bought the car from another owner who gave it a very bad life... According to the scanner (Toaf, Delphi, etc..) I have an error in the ABS, error number 111 (unknown). The 4 wheels have speeds of up to 18 km/h. I have tried different traction control buttons and the error continues. The only way is to deactivate all functions related to traction control from TOAF to avoid seeing the message. Thank you.
Cristian0308 is offline   Reply With Quote
Old 27th January 2024, 03:51   #2
trebor
This is my second home
 
Rover 75 CDTi Connoisseur SE & MG ZT Saloon 190

Join Date: Jun 2007
Location: Coven
Posts: 12,523
Thanks: 526
Thanked 1,877 Times in 885 Posts
Default

Not many diesels have Traction Control and it is built into the ABS pump modulator , so are you sure the vehicle has it ?
Seems like you are getting an ABS error message on TOAF but what warning lights are you seeing on the car dashboard IPK?
There are only 2 Traction Control buttons on the car so what buttons are you referring to ?
__________________
www.midlandsnanomeets.co.uk

Robs Car Gallery

Coven near Wolverhampton WV9

2000 Cowley Built Rover 75 2.0 V6 Club SE/ Atlantic Blue/ Sandstone/Walnut (daily driver)
2003 Land Rover Freelander 1 TD4 HSE Helsinki Blue/Black Leather (swmbo daily driver)
trebor is offline   Reply With Quote
Old 27th January 2024, 06:38   #3
Cristian0308
Newbie
 
Rover 75

Join Date: Jul 2023
Location: Toledo
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by trebor View Post
Not many diesels have Traction Control and it is built into the ABS pump modulator , so are you sure the vehicle has it ?
Seems like you are getting an ABS error message on TOAF but what warning lights are you seeing on the car dashboard IPK?
There are only 2 Traction Control buttons on the car so what buttons are you referring to ?


The button located under the climate control panel. next to the heated seats. It appears in the upper IPK as if it were always disconnected. I previously had another mg zt that also had it and disconnected the TC when I wanted. Thank you!

Last edited by Cristian0308; 27th January 2024 at 06:41..
Cristian0308 is offline   Reply With Quote
Old 27th January 2024, 22:36   #4
trebor
This is my second home
 
Rover 75 CDTi Connoisseur SE & MG ZT Saloon 190

Join Date: Jun 2007
Location: Coven
Posts: 12,523
Thanks: 526
Thanked 1,877 Times in 885 Posts
Default

Ok so the TC warning light is on all the time instead of going off as it should ,you could check the wiring at the modulator which is located by removing the battery and the battery tray , and if it has been retrofitted when its coded to the car with T4 OBD2 should be enabled otherwise the light stays on
__________________
www.midlandsnanomeets.co.uk

Robs Car Gallery

Coven near Wolverhampton WV9

2000 Cowley Built Rover 75 2.0 V6 Club SE/ Atlantic Blue/ Sandstone/Walnut (daily driver)
2003 Land Rover Freelander 1 TD4 HSE Helsinki Blue/Black Leather (swmbo daily driver)
trebor is offline   Reply With Quote
Old 1st February 2024, 08:01   #5
Jamiewelch
Posted a thing or two
 
Jamiewelch's Avatar
 
Alpina D3

Join Date: Sep 2014
Location: Cheslyn hay
Posts: 1,003
Thanks: 58
Thanked 294 Times in 227 Posts
Default

Quote:
Originally Posted by Cristian0308 View Post
Good afternoon. I have a problem with my Rover 75 diesel. I bought the car from another owner who gave it a very bad life... According to the scanner (Toaf, Delphi, etc..) I have an error in the ABS, error number 111 (unknown). The 4 wheels have speeds of up to 18 km/h. I have tried different traction control buttons and the error continues. The only way is to deactivate all functions related to traction control from TOAF to avoid seeing the message. Thank you.
Has it been remapped? If you flash a none traction map to a traction car the light will come on.
Jamiewelch is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:38.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd