75 V6 exhaust recommendations

Dashiel · 29th August 2011, 18:33

Hi
would anyone like to recommend an exhaust system manufacturer for their V6?
I suspect that mine was not fitted properly and/or was a cheap Ebay job courtesy of the previous owner.
I get way too much noise at 70 Mph from behind the engine to about where the drivers feet are. These cars are supposed to be noticeably quiet after all. So may get it checked out on a ramp, but I want to know how much I am looking at before I open my wallet.

d_a_n1979 · 29th August 2011, 18:48

If you're wanting a decent system that'll last and be well fitted go custom.

Power flow can be found around the uk, usually within decent distance of where you're based.

I'd say around the £300-£350 Mark would be the norm but that's usually dependent upon how you want the back box finished etc...

chris75 · 29th August 2011, 19:10

I used off-the-shelf Timax parts on mine . Quite happy with the job

29th August 2011, 18:33	#1
Dashiel Posted a thing or two Rover 75 V6 2.0 Club Tourer LPG Join Date: Apr 2011 Location: South East Posts: 1,405 Thanks: 3 Thanked 39 Times in 34 Posts	75 V6 exhaust recommendations Hi would anyone like to recommend an exhaust system manufacturer for their V6? I suspect that mine was not fitted properly and/or was a cheap Ebay job courtesy of the previous owner. I get way too much noise at 70 Mph from behind the engine to about where the drivers feet are. These cars are supposed to be noticeably quiet after all. So may get it checked out on a ramp, but I want to know how much I am looking at before I open my wallet. Last edited by Dashiel; 29th August 2011 at 18:35..

29th August 2011, 19:10	#3
chris75 same car since 2005 2001 Rover 75 2.0 v6 Connoisseur Saloon Join Date: Nov 2006 Location: Ellesmere Port , Cheshire Posts: 3,818 Thanks: 379 Thanked 549 Times in 466 Posts	I used off-the-shelf Timax parts on mine . Quite happy with the job __________________ Who said it was simples ?

29th August 2011, 18:48	#2
d_a_n1979 Banned 2004 MG ZT-T 190+ Join Date: Jan 2010 Location: Preston Posts: 957 Thanks: 97 Thanked 109 Times in 85 Posts	If you're wanting a decent system that'll last and be well fitted go custom. Power flow can be found around the uk, usually within decent distance of where you're based. I'd say around the £300-£350 Mark would be the norm but that's usually dependent upon how you want the back box finished etc...