|
||
|
|
3rd June 2019, 17:25 | #1 |
Regular poster
MG ZT Join Date: Apr 2019
Location: Walsall
Posts: 74
Thanks: 37
Thanked 12 Times in 4 Posts
|
rear springs
Im about to change the rear springs because one had broken.
Are there any special tips or short cuts to make this job easier ? Also changing antiroll bar drop links and bushes .. Cheers in advance for any tips... |
3rd June 2019, 17:33 | #2 |
Posted a thing or two
Rover 75 Connie Mk2 1.8 (Mo) Join Date: Feb 2017
Location: Sheffield
Posts: 1,531
Thanks: 875
Thanked 335 Times in 289 Posts
|
Hello Basil,
Marinabrian suggests loosening the rear subframe bolts on the other side and removing them on the working side, which will give you more clearance when putting them back in place. I decided to do it another way. I used a scissor jack between the upper arm and wheel arch, and this widened the gap successfully. Other people do this too. Apart from that, the only problem you might find is removing the bottom damper bolt. Oh, and you will need a BA2 socket/spanner, to free the brake pipe bolt
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41 This vehicle was the 99,307th 75 to run off the production line, out of 112,381 This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033 This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s |
3rd June 2019, 17:41 | #3 |
Regular poster
MG ZT Join Date: Apr 2019
Location: Walsall
Posts: 74
Thanks: 37
Thanked 12 Times in 4 Posts
|
Thanks
I did not think about the brake pipe. Would i have to disconnect it or just remove it from the mounting ? |
3rd June 2019, 18:19 | #4 |
Posted a thing or two
Rover 75 Connie Mk2 1.8 (Mo) Join Date: Feb 2017
Location: Sheffield
Posts: 1,531
Thanks: 875
Thanked 335 Times in 289 Posts
|
No need to disconnect it, just helps to unbolt it from the octopus tentacle thingy that the wheel hub is fastened to. (don't know it's proper name)
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41 This vehicle was the 99,307th 75 to run off the production line, out of 112,381 This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033 This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s |
3rd June 2019, 17:45 | #5 |
Avid contributor
JDM Subaru Legacy GTB6 twin turbo,, JDM Subaru Impreza WRX Join Date: Dec 2017
Location: Edinburgh
Posts: 163
Thanks: 242
Thanked 208 Times in 84 Posts
|
Did the Marinabrian method mentioned..........worked a treat, can leave anti roll bar in place and was quick.
Used the opportunity to paint and rust proof all of the subframe.
__________________
21 / 05 / 2016................ stick your 1902! Last edited by newhavenhibby; 3rd June 2019 at 17:47.. |
|
|