Replacement parking sensor looms – 2nd group buy - Page 7

Jules · 10th May 2015, 12:08

Have you tried swapping the sensors round?
Just because they click doesn't mean they are sending a signal back on the 3rd pin

Tim_Burgess · 10th May 2015, 12:16

Will do. Bumper off again then.

Bu*ger!

Tim_Burgess · 10th May 2015, 13:01

Quote:

Originally Posted by Jules

Have you tried swapping the sensors round?
Just because they click doesn't mean they are sending a signal back on the 3rd pin

Tried that, no difference. Still no outer sensors, and none at all unless I disconnect / re-connect the white connector at the ECU. Think I may give up until I can source another ECU.

Tim_Burgess · 14th June 2015, 11:28

OK, I managed to source another ECU but I'm still getting the same problem. I think I may give up now

humphshumphs · 17th August 2015, 18:24

Are these looms still available??

tomcattom · 18th August 2015, 08:15

Hi Richard,

I haven't yet had chance to look into the feasibility buying components in smaller quantities to be able to hold stock longer term, but fortunately I do have enough components left over from the last group buy to be able to make two or three more looms at the group buy price.

If you would like one I can make you one at the group buy price?

Tom

humphshumphs · 18th August 2015, 13:14

Quote:

Originally Posted by tomcattom

Hi Richard,

I haven't yet had chance to look into the feasibility buying components in smaller quantities to be able to hold stock longer term, but fortunately I do have enough components left over from the last group buy to be able to make two or three more looms at the group buy price.

If you would like one I can make you one at the group buy price?

Tom

Yes Please

Let me have the payment details

tomcattom · 20th August 2015, 07:58

I'll give you a shout for payment when the loom is built. I'll try and get it assembled this weekend.

Data · 20th August 2015, 22:22

Hi,

Would you have enough parts to make a second one?

I need to replace one sensor so makes sense to sort the loom at whist the bumper is off 😀

Cheers,

Mark S.

tomcattom · 21st August 2015, 07:38

humphshumphs & Data,

I can make looms for both of you. Can you both please PM me with the following details:

Do you require a saloon or tourer loom
The last 6 digits of your VIN so I can make sure I have and fit the right loom to body connector.

I will try and get the looms built this weekend and shipped early next week. I'll PM you both for payment once the looms are built.

For anyone else that wants a loom, I'm now out of stock of components to make any further looms once these two are sent. I will take a look at the pricing for making smaller quantities to see if it is feasible going forwards and I will create a new thread to advertise them if the pricing is sensible.

10th May 2015, 12:08	#61
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Have you tried swapping the sensors round? Just because they click doesn't mean they are sending a signal back on the 3rd pin __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

10th May 2015, 12:16	#62
Tim_Burgess This is my second home 1999 75 Connoisseur SE 2.5, 2000 75 Classic SE 2.0, 2012 Lancia Delta 3, 2016 Dacia Sandero Ambiance Join Date: Jan 2007 Location: Kilcreggan Posts: 3,191 Thanks: 334 Thanked 334 Times in 162 Posts	Will do. Bumper off again then. Buger! __________________ The fact there's a highway to hell and only a stairway to heaven says a lot about anticipated traffic numbers.*.

14th June 2015, 11:28	#64
Tim_Burgess This is my second home 1999 75 Connoisseur SE 2.5, 2000 75 Classic SE 2.0, 2012 Lancia Delta 3, 2016 Dacia Sandero Ambiance Join Date: Jan 2007 Location: Kilcreggan Posts: 3,191 Thanks: 334 Thanked 334 Times in 162 Posts	OK, I managed to source another ECU but I'm still getting the same problem. I think I may give up now __________________ *The fact there's a highway to hell and only a stairway to heaven says a lot about anticipated traffic numbers.*.

17th August 2015, 18:24	#65
humphshumphs I really should get out more....... No longer a Rover Owner Join Date: Jan 2011 Location: As far east as you can go in the UK and not get wet feet. Posts: 2,273 Thanks: 404 Thanked 309 Times in 246 Posts	Are these looms still available?? __________________ Richard. No longer a 75 owner as my tourer made it to the moon, and died on it's way back. But 1/4 million miles ain't bad.

21st August 2015, 07:38	#70
tomcattom Avid contributor Typhoon ZT-T 190+, 220 Coupe, Rover Sport 420GSiT & ½ of a 216GTi Join Date: Apr 2013 Location: Buckinghamshire Posts: 161 Thanks: 3 Thanked 22 Times in 20 Posts	humphshumphs & Data, I can make looms for both of you. Can you both please PM me with the following details: Do you require a saloon or tourer loom The last 6 digits of your VIN so I can make sure I have and fit the right loom to body connector. I will try and get the looms built this weekend and shipped early next week. I'll PM you both for payment once the looms are built. For anyone else that wants a loom, I'm now out of stock of components to make any further looms once these two are sent. I will take a look at the pricing for making smaller quantities to see if it is feasible going forwards and I will create a new thread to advertise them if the pricing is sensible.

18th August 2015, 08:15	#66
tomcattom Avid contributor Typhoon ZT-T 190+, 220 Coupe, Rover Sport 420GSiT & ½ of a 216GTi Join Date: Apr 2013 Location: Buckinghamshire Posts: 161 Thanks: 3 Thanked 22 Times in 20 Posts	Hi Richard, I haven't yet had chance to look into the feasibility buying components in smaller quantities to be able to hold stock longer term, but fortunately I do have enough components left over from the last group buy to be able to make two or three more looms at the group buy price. If you would like one I can make you one at the group buy price? Tom

20th August 2015, 07:58	#68
tomcattom Avid contributor Typhoon ZT-T 190+, 220 Coupe, Rover Sport 420GSiT & ½ of a 216GTi Join Date: Apr 2013 Location: Buckinghamshire Posts: 161 Thanks: 3 Thanked 22 Times in 20 Posts	I'll give you a shout for payment when the loom is built. I'll try and get it assembled this weekend.

20th August 2015, 22:22	#69
Data Newbie MG ZT-T 190+ Join Date: Apr 2015 Location: Harrow Posts: 24 Thanks: 0 Thanked 7 Times in 4 Posts	Hi, Would you have enough parts to make a second one? I need to replace one sensor so makes sense to sort the loom at whist the bumper is off 😀 Cheers, Mark S.