Replacement parking sensor looms – 2nd group buy

tomcattom · 10th January 2015, 12:51

Following the success of the first group buy, my intention was to hold a few looms in stock at a time for one off buys, however there seems to be enough interest for me to warrant running a second group buy. So here it is.

What do I get?
What you will be getting is a direct plug and play replacement PDC loom with improved soldered joints which are appropriately weatherproofed with adhesive filled heatshrink. You will also be supplied with 6 fir tree zip ties which you can use to secure the loom to the bumper foam inserts In the OE manner.

Saloon vs Tourer

The looms are compatible with all saloons and tourers from 2002 onwards (VIN 245554 onwards). When ordering please specify if you have a saloon or tourer since the looms differ in lengths between these models.

I can't currently build looms for cars prior to this since the body connector changed and I don't yet have a pin-out for it.

What it will cost?
The looms are priced at £35 including first class P&P.

I’m happy to ship outside the UK, but the following surcharges will apply to cover increased postage costs. Delivery outside the UK will be 5-10 days.

Europe = £3.00
Rest of World = £6.00

How long will it take to get one?
The looms take me a about an hour to assemble, so given the likely interest it could take me a month or more to get all the looms built and shipped once I have all the parts in stock. I will be assembling these in what little spare time I have so please be patient with me. I will keep this thread updated as I go.

Do I get a warranty?
I will provide a 12 month warranty on all looms I produce which will be effective from the date of shipment. I will operate this on a return and replacement basis to keep things simple.

How do I get one?
I will need an up-front non-refundable deposit of £15 to contribute towards the cost of the parts I need to order in bulk; I will take the balance of payment once looms are built and ready to ship.

Therefore if you want a loom, please start list below and include whether you want one for a tourer or a saloon. I’ll drop everyone a PM with my bank details to transfer the deposit. Bank transfer is preferred but I’m happy to discuss other options on a case by case basis.

I will keep this group buy open until the end of January, after which you’ll have to wait for the initial orders to be completed before I can take further orders.

Questions?
If you have any questions, please post them in this thread and I’ll answer as best I can.

Lee Lord · 10th January 2015, 14:46

Hi. I would like to purchase a loom for my 2005 180SE saloon. Thanks. Lee

Falcon Flyer · 10th January 2015, 15:44

Saloon set for me please.

The Mighty Quinn · 19th January 2015, 21:22

Hi Tom,
I have an early 2004 mk1 saloon.
How involved is the install procedure for the parking sensors? Does this loom just plug in somewhere on all cars (bearing in mind that my car has suffered extensively from Project Drive)?
Is T4 required?
Is the only other requirement the 4 OEM sensor units?

Sorry for my ignorance and all the questions, but if the install is fairly straightforward, you can definitely put me down a saloon loom.

Cheers.

MrDoodles · 19th January 2015, 21:30

Set for a Mk1 ZT please!

buster12 · 20th January 2015, 00:54

Yes please Tom for my zt-t.

Cheers

tomcattom · 31st January 2015, 13:05

The list as it stands is as follows.

1. Lee Lord - Saloon
2. Falcon Flyer - Saloon
3. MrDoodles - Saloon
4. buster12 - Tourer
5. Jules - x1 Saloon, x2 Tourer
6. tonedef - Tourer
7. mystabe - Tourer
8. Tim_Burgess - Tourer
9. Cribbit - Saloon
10. Andy Hatch - Tourer

Midnight tonight is the closing date for inclusion in this group buy.

Quote:

Originally Posted by The Mighty Quinn

Hi Tom,
I have an early 2004 mk1 saloon.
How involved is the install procedure for the parking sensors? Does this loom just plug in somewhere on all cars (bearing in mind that my car has suffered extensively from Project Drive)?
Is T4 required?
Is the only other requirement the 4 OEM sensor units?

Sorry for my ignorance and all the questions, but if the install is fairly straightforward, you can definitely put me down a saloon loom.

Cheers.

Karl, I'm afraid I don't know whether is is simply a plug and play piece of kit if you get all teh sensors, the loom and the control box, or if there is more to it than that. Maybe someone more knowledgable than me on this might be able to offer some input.

Jules · 31st January 2015, 13:10

Tom
Can I modify my order :

Saloon qty 3
Tourer qty 6

Cheers
Jules

Data · 20th August 2015, 22:22

Hi,

Would you have enough parts to make a second one?

I need to replace one sensor so makes sense to sort the loom at whist the bumper is off 😀

Cheers,

Mark S.

tomcattom · 21st August 2015, 07:38

humphshumphs & Data,

I can make looms for both of you. Can you both please PM me with the following details:

Do you require a saloon or tourer loom
The last 6 digits of your VIN so I can make sure I have and fit the right loom to body connector.

I will try and get the looms built this weekend and shipped early next week. I'll PM you both for payment once the looms are built.

For anyone else that wants a loom, I'm now out of stock of components to make any further looms once these two are sent. I will take a look at the pricing for making smaller quantities to see if it is feasible going forwards and I will create a new thread to advertise them if the pricing is sensible.

10th January 2015, 12:51	#1
tomcattom Avid contributor Typhoon ZT-T 190+, 220 Coupe, Rover Sport 420GSiT & ½ of a 216GTi Join Date: Apr 2013 Location: Buckinghamshire Posts: 161 Thanks: 3 Thanked 22 Times in 20 Posts	Replacement parking sensor looms – 2nd group buy Following the success of the first group buy, my intention was to hold a few looms in stock at a time for one off buys, however there seems to be enough interest for me to warrant running a second group buy. So here it is. What do I get? What you will be getting is a direct plug and play replacement PDC loom with improved soldered joints which are appropriately weatherproofed with adhesive filled heatshrink. You will also be supplied with 6 fir tree zip ties which you can use to secure the loom to the bumper foam inserts In the OE manner. Saloon vs Tourer The looms are compatible with all saloons and tourers from 2002 onwards (VIN 245554 onwards). When ordering please specify if you have a saloon or tourer since the looms differ in lengths between these models. *I can't currently build looms for cars prior to this since the body connector changed and I don't yet have a pin-out for it.* What it will cost? The looms are priced at £35 including first class P&P. I’m happy to ship outside the UK, but the following surcharges will apply to cover increased postage costs. Delivery outside the UK will be 5-10 days. Europe = £3.00 Rest of World = £6.00 How long will it take to get one? The looms take me a about an hour to assemble, so given the likely interest it could take me a month or more to get all the looms built and shipped once I have all the parts in stock. I will be assembling these in what little spare time I have so please be patient with me. I will keep this thread updated as I go. Do I get a warranty? I will provide a 12 month warranty on all looms I produce which will be effective from the date of shipment. I will operate this on a return and replacement basis to keep things simple. How do I get one? I will need an up-front non-refundable deposit of £15 to contribute towards the cost of the parts I need to order in bulk; I will take the balance of payment once looms are built and ready to ship. Therefore if you want a loom, please start list below and include whether you want one for a tourer or a saloon. I’ll drop everyone a PM with my bank details to transfer the deposit. Bank transfer is preferred but I’m happy to discuss other options on a case by case basis. I will keep this group buy open until the end of January, after which you’ll have to wait for the initial orders to be completed before I can take further orders. Questions? If you have any questions, please post them in this thread and I’ll answer as best I can. Last edited by tomcattom; 20th January 2015 at 07:11..

10th January 2015, 15:44	#3
Falcon Flyer Gets stuck in R75 CDTi Auto Conn SE Mk1 Saloon Join Date: Feb 2010 Location: Crowthorne, Berkshire Posts: 665 Thanks: 190 Thanked 64 Times in 54 Posts	Saloon set for me please. __________________ The only 75 with a non-factory fitted, factory fitted sunroof!!!!

31st January 2015, 13:10	#8
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Tom Can I modify my order : Saloon qty 3 Tourer qty 6 Cheers Jules __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

21st August 2015, 07:38	#10
tomcattom Avid contributor Typhoon ZT-T 190+, 220 Coupe, Rover Sport 420GSiT & ½ of a 216GTi Join Date: Apr 2013 Location: Buckinghamshire Posts: 161 Thanks: 3 Thanked 22 Times in 20 Posts	humphshumphs & Data, I can make looms for both of you. Can you both please PM me with the following details: Do you require a saloon or tourer loom The last 6 digits of your VIN so I can make sure I have and fit the right loom to body connector. I will try and get the looms built this weekend and shipped early next week. I'll PM you both for payment once the looms are built. For anyone else that wants a loom, I'm now out of stock of components to make any further looms once these two are sent. I will take a look at the pricing for making smaller quantities to see if it is feasible going forwards and I will create a new thread to advertise them if the pricing is sensible.

10th January 2015, 14:46	#2
Lee Lord Newbie MG ZT SE 180 Auto Join Date: Apr 2012 Location: Exmouth Posts: 23 Thanks: 6 Thanked 1 Time in 1 Post	Hi. I would like to purchase a loom for my 2005 180SE saloon. Thanks. Lee

19th January 2015, 21:22	#4
The Mighty Quinn Posted a thing or two 2004 mk1 Rover 75 1.8T Club SE saloon (auto) Join Date: Jul 2013 Location: Enniskillen Posts: 1,307 Thanks: 670 Thanked 254 Times in 222 Posts	Hi Tom, I have an early 2004 mk1 saloon. How involved is the install procedure for the parking sensors? Does this loom just plug in somewhere on all cars (bearing in mind that my car has suffered extensively from Project Drive)? Is T4 required? Is the only other requirement the 4 OEM sensor units? Sorry for my ignorance and all the questions, but if the install is fairly straightforward, you can definitely put me down a saloon loom. Cheers.

19th January 2015, 21:30	#5
MrDoodles Banned MG ZT+ V6 190 Join Date: Nov 2011 Location: Spalding Posts: 13,245 Thanks: 369 Thanked 1,196 Times in 818 Posts	Set for a Mk1 ZT please!

20th January 2015, 00:54	#6
buster12 Regular poster MG ZT-T Join Date: Apr 2008 Location: Leatherhead Posts: 85 Thanks: 22 Thanked 14 Times in 5 Posts	Yes please Tom for my zt-t. Cheers

20th August 2015, 22:22	#9
Data Newbie MG ZT-T 190+ Join Date: Apr 2015 Location: Harrow Posts: 24 Thanks: 0 Thanked 7 Times in 4 Posts	Hi, Would you have enough parts to make a second one? I need to replace one sensor so makes sense to sort the loom at whist the bumper is off 😀 Cheers, Mark S.