That IPK test

[MGOracle]

Forgotten how you do it.

Can someone tell me. I dont want to get into the menu, just make the dials go round all flashy!

Thanks

[GreyGhost]

To enable the OBC diagnostics:
a) Press and hold the trip reset button.
b) Put key into ignition switch and turn to KLR (Ignition switch
position #1)
c) Your LCD display will show something like this "test 1.-"
d) Press the reset button till you get to "test 19.-". (19.0 unlocks all
the features)
e) Wait for display to show "Log I -off" and press the reset button
f) With no delay press Trip Reset several times to select one of the
following functions:
1 Car, Engine and cluster data
1.0 VIN serial number
1.1 K-number
1.2 Cluster Part #
1.3 Coding (04)/diagnosis (52)/bus index (10)
1.4 1200 Week (12)/year of manufacture (2000)
1.5 09_160 Hardware (09) and software # (16.0) of cluster
1.6 Injection Status-number of cylinders-motor number
2.0 2 Cluster System Test - Activates the gauge drivers, indicators and
LEDs to confirm function
3 Service Inspection (SI) Data
3.0 Used fuel in liters since last SI
3.1 Periodic inspection days; elapsed days (since last SI)
4 Momentary Consumption
4.0 Instant fuel consumption - 0145=14.5 liters/100km
4.1 Instant fuel consumption - 0018=1.8 l/Hour
5 Distance Gone Consumption
5.0 Average mileage; 082=8.2 liters/100km
5.1 Calc. km to refuel (momentary distance to go)
6 Fuel Level sensor inputs in liters
6.0 Fuel level averaged; 109330 - Left half sensor input=10.9 liters;
Right sensor input=33.0 liters
6.1 Total tank level averaged; 0439 - vlgs 6.0: 10.9+33.0=43.9 liters
6.2 Indicated value and diagnostics:
last digit: 1 - both sensors ok; 2 - sensor error; 3 - signal error
- no display
7 Temperature and Speed
7.0 021+ Coolant/Engine temperature (2.1C)
7.1 130 Ambient/Outside temperature - chg met 5 pts. 125/130/135
7.2 Engine speed / Current RPMs 1/min
7.3 Vehicle speed / Current Speed in km/hour
8 Values of 7.0 bis 7.3 in HEX form
9 Battery
9.0 140 Battery Voltage - 140 = UB 14.0v
10.0 Country code
11.0 Unit code
12.0 Not used
13.0 Gong test
14.0-14.4 Error memory: if 000000 no error in memory
15.0 - 18.0 not used
19 Lock Status; unlocks functions in range 3-18
19.0 L-On/L-Off Unlock: press button when "L-Off"
20.0 Correction Factor for OBC Fuel Consumption
Formula for the Correction Factor:
Indicated Consumption X 1000 / Measured Consumption = Factor (4321)
Press Reset button to begin setting the of the first (1) digit - press
reset when the right digit appears
20.1 Setting of the second (2) digit
20.2 Setting of the hundred (3) and thousand (4) digit
20.3 Store and Display the Correction Factor

[MGOracle]

Ta GG, just what I needed.

[pondweed]

would someone with a 195 tyred and a 225 tyred car be able to find out (and post) their factory fuel correction factors (number 20) if they are doing the above pls?? All in aid of research...

[shakennstirred]

it would also be good if we could figger out what to set it to so the mpg reading isnt out when you have one of rons tuning boxes fitted

[pondweed]

if you find axolotl's recent posts they show you how to do it.... you can factor in whatever you need, although you wont be able to account if you change your Synergy settings regularly. (probably average 4-11% overread across the settings)

[Simon]

Originally Posted by pondweed

if you find axolotl's recent posts they show you how to do it.... you can factor in whatever you need, although you wont be able to account if you change your Synergy settings regularly. (probably average 4-11% overread across the settings)

Said posts are over here http://www.the75andztclub.co.uk/foru...ad.php?t=15117