Rear Number Plate Lamps - Various bits and pieces, repairs kits etc available

DMGRS · 25th August 2016, 20:14

Hello guys and girls,
We've recently bought a consignment of Rear Number Plate Lamp parts, and are offering a selection of repair kits, components and complete lamp assemblies.

Previously, only the complete assembly was available - a shame, as the fault is usually the PCB or the connection between the PCB and connectors corroding. The housing is normally perfectly fine, and OK to re use.

Based on this, I've decided to offer a number of options:
- PCB Kits: including all connectors and supplied ready to fit. Available with brand new, OE bulbs for an extra £2.00.
- Complete Assembly, less lenses and gaskets: We don't have the gaskets for the lenses available, so you'll need to re-use your own. At under half the price of a new unit from XPart, these are fantastic value. Includes 2x new OE bulbs.
- Lenses (Pair) : A pair of brand new lenses for the assembly, excluding gaskets. Ideal if yours are yellowed or cracked with age.
- Bulbs (Pair) : OE bulbs, as fitted from the factory. Cheap bulbs don't tend to last well in these, so enjoy the OE lifespan with these for £2.00 per pair.

See all options and pricing here:
Rover 75 / MG ZT Rear Numberplate Lamp Assembly - XFC000220MMM / XFC000011MMM / XFC000010

I really hope this helps members escape the rather expensive complete items, without having to bridge theirs with bits of wire.

*ALL PARTS ABOVE ARE SALOON ONLY, BOTH R75 and MG ZT*

DMGRS · 28th August 2016, 16:07

Blimey, you've kept me busy!
Plenty of everything left at the moment. Thanks for the orders so far.

DMGRS · 6th September 2016, 23:16

We've just had some more PCBs made up - they've been unavailable for a few days.

Thanks again for the orders so far.

DMGRS · 6th January 2017, 19:51

Just had a lot more PCBs for these made up - definitely the quickest and cheapest way to repair a dodgy number plate lamp!

Grab 'em while they're hot (but use gloves...)

https://www.dmgrs.co.uk/products/r75...y-xfc000220mmm

DMGRS · 24th July 2018, 21:27

Just a quick update - we've revised the design to use miniature nuts and bolts - we selected stainless items to make sure there's no corrosion issues etc.

These give tighter clamping of the bulb holder to PCB, and if down the line any bad connections do appear you can just take them apart to clean things up.

DMGRS · 25th September 2019, 21:08

We ran out of stock for a while, however have just commissioned a run of PCBs to bring these back into the green - and we're offering them for the all-time low price of £14.99 until the 10th October.

https://www.dmgrs.co.uk/products/r75...y-xfc000220mmm

Another much-needed part brought back from 'the dead'

Dawn · 26th September 2019, 05:57

Hi Mat if I get one how do I fit into the plastic surround? Is it obvious after the black sticky is removed or more to it? I will be fitting a replacement plinth and would like new innards but unsure of fitment.

DMGRS · 26th September 2019, 09:31

Hi Dawn, it's pretty simple with the bits and pieces in front of you - the old PCB is riveted to the plastic so needs a bit of force to remove. The new one simply sits in its place, but you need a dab of glue to hold it in place.

25th August 2016, 20:14	#1
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Rear Number Plate Lamps - Various bits and pieces, repairs kits etc available Hello guys and girls, We've recently bought a consignment of Rear Number Plate Lamp parts, and are offering a selection of repair kits, components and complete lamp assemblies. Previously, only the complete assembly was available - a shame, as the fault is usually the PCB or the connection between the PCB and connectors corroding. The housing is normally perfectly fine, and OK to re use. Based on this, I've decided to offer a number of options: - PCB Kits: including all connectors and supplied ready to fit. Available with brand new, OE bulbs for an extra £2.00. - Complete Assembly, less lenses and gaskets: We don't have the gaskets for the lenses available, so you'll need to re-use your own. At under half the price of a new unit from XPart, these are fantastic value. Includes 2x new OE bulbs. - Lenses (Pair) : A pair of brand new lenses for the assembly, excluding gaskets. Ideal if yours are yellowed or cracked with age. - Bulbs (Pair) : OE bulbs, as fitted from the factory. Cheap bulbs don't tend to last well in these, so enjoy the OE lifespan with these for £2.00 per pair. See all options and pricing here: Rover 75 / MG ZT Rear Numberplate Lamp Assembly - XFC000220MMM / XFC000011MMM / XFC000010 I really hope this helps members escape the rather expensive complete items, without having to bridge theirs with bits of wire. ALL PARTS ABOVE ARE SALOON ONLY, BOTH R75 and MG ZT __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

28th August 2016, 16:07	#2
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Blimey, you've kept me busy! Plenty of everything left at the moment. Thanks for the orders so far. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

6th September 2016, 23:16	#3
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	We've just had some more PCBs made up - they've been unavailable for a few days. Thanks again for the orders so far. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

6th January 2017, 19:51	#4
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Just had a lot more PCBs for these made up - definitely the quickest and cheapest way to repair a dodgy number plate lamp! Grab 'em while they're hot (but use gloves...) https://www.dmgrs.co.uk/products/r75...y-xfc000220mmm __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

24th July 2018, 21:27	#5
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Just a quick update - we've revised the design to use miniature nuts and bolts - we selected stainless items to make sure there's no corrosion issues etc. These give tighter clamping of the bulb holder to PCB, and if down the line any bad connections do appear you can just take them apart to clean things up. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

25th September 2019, 21:08	#6
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	We ran out of stock for a while, however have just commissioned a run of PCBs to bring these back into the green - and we're offering them for the all-time low price of £14.99 until the 10th October. https://www.dmgrs.co.uk/products/r75...y-xfc000220mmm Another much-needed part brought back from 'the dead' __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

26th September 2019, 05:57	#7
Dawn I really should get out more....... MG ZT 180+ auto Join Date: May 2016 Location: Ilkeston, Derbys Posts: 2,743 Thanks: 285 Thanked 1,128 Times in 504 Posts	Hi Mat if I get one how do I fit into the plastic surround? Is it obvious after the black sticky is removed or more to it? I will be fitting a replacement plinth and would like new innards but unsure of fitment.

26th September 2019, 09:31	#8
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Hi Dawn, it's pretty simple with the bits and pieces in front of you - the old PCB is riveted to the plastic so needs a bit of force to remove. The new one simply sits in its place, but you need a dab of glue to hold it in place. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off