|
||
|
11th October 2007, 20:18 | #1 |
Newbie
rover 75 Join Date: Feb 2007
Location: preston
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
cam belt change kv6
hi just about to have the timing belts changed on my 75 2.0 kv6
wondered if i need any more parts apart from the belts themselves i will have spark plugs replaced at same time and new oil and filter anyone know if any tensioners etc are required? thanks kb |
11th October 2007, 20:46 | #2 |
Banned
180+ Sport Auto Join Date: Oct 2006
Location: Bedford Middle Level
Posts: 17,787
Thanks: 0
Thanked 18 Times in 5 Posts
|
Definitely tensioners as well. While the engine is stripped down water pump may also be replaced. The experts will be along shortly to advise.
|
11th October 2007, 21:18 | #3 |
This is my second home
Rover 75 V8 Join Date: Oct 2006
Posts: 3,448
Thanks: 0
Thanked 206 Times in 32 Posts
|
While its fully accessible take the opportunity to check the thermostat in the 'v' for any signs of weeping coolant (orange stains) and replace if required (much cheaper than doing again when all is back together) . Check/replace auxiliary belt for power steering (iirc) and as GG says replace the tensioners. Water pump change is a good idea on an engine of that age and with this work it really is just the cost of the part. If it needs swapping later then nearly all the same work has to be done again.
Also its a good idea to check the condition of the breather pipes and plastic 't' piece connector on top of the engine. hth
__________________
Mike [SIGPIC][/SIGPIC] |
12th October 2007, 07:17 | #4 |
Newbie
rover 75 Join Date: Feb 2007
Location: preston
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
hi thanks for info my friend is doing job for me at his garage so i said i will get the parts
dont mind doing an oill change etc myself but this job looks a bit daunting! i aws considering swopping for a cdt but have decided to keep hold of the v6 i use it every day and apart from the usual wear and tear bits tyres etc it has never let me down up to now (three years) recently had new brake pipes and a ft lower arm fitted for mot and thats about it . i will beonto x part shortly for bits |
Thread Tools | |
Display Modes | |
|
|