|
||
|
4th November 2019, 10:53 | #1 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Grommet holes above/near rear subframe
I've got two big (30mm approx) blanking grommets that I've taken out from somewhere near the rear subframe but I can't remember where exactly. They definitely came from one of these positions:
1) Green arrows in pic. Directly behind the fuel tank there's a transverse 'box' section with four holes in it - two near the rear fuel tank strap bolts and two between the pair of subframe bolt holes (the ones for the short arms of the subframe). 2) Blue arrows in pic. Directly in front of the spare wheel well there's another transverse 'box' section with two holes in it - one above the plastic fuel filler pipe and the other in the corresponding spot on the opposite side. (In the pic these two holes are covered by masking tape). So that's six holes altogether but I've only got two grommets. Which holes did they come from? And should there be another four grommets? Pic taken from under RH rear wheel arch. There are also several smaller holes dotted about here and there and they're empty too. For instance, there's one near each of the ABS cable clips (the one of the right is visible in the above pic). Why are they empty? |
4th November 2019, 11:12 | #2 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
PS. The two leftover grommets mentioned above are identical in size and shape to the ones that cover the holes in the ends of the sills (behind wheel arch liners).
|
4th November 2019, 11:58 | #3 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
|
4th November 2019, 13:13 | #4 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
|
5th November 2019, 00:55 | #5 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,699
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
[QUOTE]
Quote:
Hi Simon. I have quite a few 25mm rubber grommets if you need some drop me a PM I use them for the plenum spy hole mods that are FOC at our meets Arctic.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 5th November 2019 at 00:59.. |
|
5th November 2019, 08:30 | #6 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Thanks for the offer Steve but I ordered an assortment box yesterday. It includes some 25mm which will hopefully fit - https://www.amazon.co.uk/dp/B07BNJFK...395841_TE_dp_1
The question is - what are all these holes for in the first place, and why are they just left open to the elements. |
Thread Tools | |
Display Modes | |
|
|