|
||
|
6th September 2018, 12:11 | #1 |
Newbie
none at the moment Join Date: Sep 2018
Location: basingstoke
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Oh no..not another T4 testbook post..!
Hi guys,
I am new here, 1st post.. so hello to everyone. Im not new to rovers though and have been on the Rover scene since Rover200.com, roverload and rovertech (same username) Ive had my fair share of rovers from metros, zr turbos, 200 400 and the ZTs. So.. down to my issue.. well not really an issue, more of a challenge.. Ive just purchased (at great expense) a more or less complete Landrover T4 testbook system, with all the cables and most of the disks, which works fine. I hoped to use this on my MG ZR Turbo mems 1.9 with the correct rover disk (DRE0008Y?) , which i got from the seller... turns out i cant and .. i believe need the MG Rover version of RDS V5.06. Have i got that right? Im aware i will need to dual boot the laptop, for swap hard drives etc and being in IT have no problem doing this. Can anyone help? Regards Paul. |
6th September 2018, 14:45 | #2 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,406
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Hi and welcome, to the club.
Yes for Rovers you need RDS 5.06 it does Landrover too unlike 7.06 which only does Landrover so there's no real need to dual boot unless you really want to You might find it to download online if you google it last time I looked it was around but that's a while ago. Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
6th September 2018, 15:09 | #3 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Just have a look on eBay for Millicent_bystander, or Tidy_Shopper, there is a man who will certainly be able to furnish you with a pirated version of RDS5.06
|
6th September 2018, 17:06 | #4 |
Newbie
none at the moment Join Date: Sep 2018
Location: basingstoke
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hello and thanks to both of you for your reply’s.
It’s currently running rds 6.00 but it came with a copy of rds 5.06l, as this is a copy, I assume it’s a land rover version, as it’s not marked. So I need to down grade to rds 5.06 and this will run the dre0008y rover disk? Is that right? |
6th September 2018, 17:27 | #5 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
RDS 5.06 can then be installed, followed by running the LANGMAP upgrade files contained on DST0001A and DXT0002W. You can then run both Rover and Land Rover discs on your machine Brian |
|
6th September 2018, 17:46 | #6 | |
SERVICING AND DEALER DIAGNOSTICS
MG ZT CDTI 135 + & MGZT CDTI AUTO 160 & ROVER 75 TOURER CDTI 160 TROPHY YELLOW Join Date: Aug 2013
Location: Hernebay
Posts: 4,331
Thanks: 818
Thanked 2,414 Times in 1,141 Posts
|
Quote:
Mick
__________________
[SIGPIC][/SIGPIC] T4 Owner Jobs done : new UBP, Spy hole mod, Rear hub(wheel bearing),plenum cleaned and emptied, Inline thermostat fitted,Full service, In car Digital tv/DVD Bluetooth Satnav etc, Replaced UBP, Restored headlights,Fixed airbag connection.replaced HP pump,replaced rear light seals,changed intercooler O rings. Jobs to do: ,replace drivers lock,.[/SIZE] |
|
6th September 2018, 18:47 | #7 | |
Newbie
none at the moment Join Date: Sep 2018
Location: basingstoke
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
Ok thanks for that. I’ve installed xp pro on a fresh machine (laptop), followed by rds 5.06, this runs both the rover disks I have. I don’t have the other two disks dst0001a and dxt0002w what do the langmap upgrade files do? Of course I’ve yet to plug it into the t4 hardware and try it. |
|
6th September 2018, 21:36 | #8 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
It might well work ok with the legacy testbook disc for your MEM1.9 job without the upgrades to the LANGMAP, but it will chuck out some of the later stuff......especially Pektron SCU |
|
7th September 2018, 14:20 | #9 |
Posted a thing or two
rover 75 cdti(rhd), MG ZR(lhd), MG TF(lhd), MG TF(rhd), mini mpi (lhd), Renault megane III (awful) Join Date: Mar 2014
Location: East of France
Posts: 1,282
Thanks: 124
Thanked 114 Times in 93 Posts
|
When you say you have a ZR turbo, are you talking diesel ?
And aren't all the Rover and MGs from 2000 MEMS 3 ? |
7th September 2018, 17:42 | #10 | |
Newbie
none at the moment Join Date: Sep 2018
Location: basingstoke
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
Well it’s working, .. I got all the networking stuff off the old laptop. I will change those settings tho, as it’s a little quirky when booting up. I’ve just set the speed but I can’t find the line negotiation to change it? I’m having to power up or cycle the t4 hardware after the laptop has booted into the t4 software, it won’t find it otherwise. Can I get the langmaps stuff and install them off the later rds 6 disk? Cheers. |
|
|
|