What I did with my Rover 75/MG ZT today? - Page 30

Dal74 · 1st March 2014, 16:16

Just finished fitting my electric rear blind (I was lucky the wires were already there, saying that I seem to have all the plugs ready and waiting behind the switch panel

) and then some new MG badges front and rear, had to chamfer the bottom edges of the front one and but all good

anyone want my old shelf

suzublu · 1st March 2014, 16:17

Quote:

Originally Posted by Mikeal1

Fixed my interior light.

Looked for wiring looms for autodip mirror and illuminated visors. I don't have them :-( gutted

You will have the illuminated visor one's, just look a bit harder

Mikeal1 · 1st March 2014, 16:19

Quote:

Originally Posted by suzublu

You will have the illuminated visor one's, just look a bit harder

Well if I have I have no idea where it is.
Firstly I took the interior light out and had a feel around. Then I took the drivers pillar cover off couldn't see or feel it anywhere.

Jordan Apex · 1st March 2014, 16:22

Quote:

Originally Posted by Mikeal1

Well if I have I have no idea where it is.
Firstly I took the interior light out and had a feel around. Then I took the drivers pillar cover off couldn't see or feel it anywhere.

They're at the very bottom of the car behind the furthest panel to the side of the car, you have to run the wires up yourself

ZedTeeTee · 1st March 2014, 16:23

Quote:

Originally Posted by Mikeal1

Well if I have I have no idea where it is.
Firstly I took the interior light out and had a feel around. Then I took the drivers pillar cover off couldn't see or feel it anywhere.

They are tucked up in the footwells - the passenger one is usually easy to find, the drivers one can be a bit trickier

Mikeal1 · 1st March 2014, 16:24

Quote:

Originally Posted by Mofo

They are tucked up in the footwells - the passenger one is usually easy to find, the drivers one can be a bit trickier

Oh right. I might wait until a spanner meet then.

Thanks guys.

suzublu · 1st March 2014, 16:24

Wrong place

drop the panels down under the dash, either side, wrapped around the large wiring harness in black tape, you'll find black/purple wires with a plug on the end, those are the illuminated visor wires.

Driver's side is a little harder, as they're tucked right up behind the LSM

too slow as usual

pab · 1st March 2014, 16:28

Washed, polished and waxed. Looks mint.

Alan123 · 1st March 2014, 16:35

Changed diesel filter today and fitted central locking thingy in drivers door all working again now

yzf600r · 1st March 2014, 16:41

Painted front calipers Kawasaki green. Leaving to harden overnight before putting everything back together. Hopefully get rears done next weekend

1st March 2014, 16:16	#291
Dal74 Regular poster MG ZT 135 Join Date: Feb 2014 Location: Bournemouth Posts: 60 Thanks: 5 Thanked 3 Times in 3 Posts	Just finished fitting my electric rear blind (I was lucky the wires were already there, saying that I seem to have all the plugs ready and waiting behind the switch panel ) and then some new MG badges front and rear, had to chamfer the bottom edges of the front one and but all good anyone want my old shelf

1st March 2014, 16:24	#297
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,962 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	Wrong place drop the panels down under the dash, either side, wrapped around the large wiring harness in black tape, you'll find black/purple wires with a plug on the end, those are the illuminated visor wires. Driver's side is a little harder, as they're tucked right up behind the LSM too slow as usual

1st March 2014, 16:28	#298
pab Banned MG ZT V6 190+ Join Date: Sep 2008 Location: Leeds Posts: 33,223 Thanks: 41 Thanked 1,614 Times in 1,416 Posts	Washed, polished and waxed. Looks mint.

1st March 2014, 16:35	#299
Alan123 Posted a thing or two Rover 75 saloon Join Date: Oct 2013 Location: Darlaston Posts: 1,897 Thanks: 484 Thanked 325 Times in 261 Posts	Changed diesel filter today and fitted central locking thingy in drivers door all working again now

1st March 2014, 16:41	#300
yzf600r Loves to post MG ZT cdti Join Date: Mar 2013 Location: sheffield Posts: 251 Thanks: 25 Thanked 22 Times in 21 Posts	Painted front calipers Kawasaki green. Leaving to harden overnight before putting everything back together. Hopefully get rears done next weekend