the new metal master cylinder

[First_damned]

Originally Posted by First_damned

I only fitted it on Saturday just gone and looks like its been leaking from day one

I need to replace the seal asap as I do a lot of miles

[HarryM1BYT]

Originally Posted by FrenchMike

So,the rear seal is implied ...


Mike

Front seal, as in nearest the seal nearest the front of the car. Rear seal as in when you are sat in the drivers seat, the furthest from you

[HarryM1BYT]

Originally Posted by First_damned

I need to replace the seal asap. Awaiting response

Rather than posting a request in the thread, contact Andy direct, he may not be following the thread.

[First_damned]

Originally Posted by HarryM1BYT

Front seal, as in nearest the seal nearest the front of the car. Rear seal as in when you are sat in the drivers seat, the furthest from you

Its leaking from the top from in the brass bit were the rod sticks out. I assume there's two seals on the piston inside it could be either letting fluid past

[First_damned]

I'm having a new piston complete with new seals sent out to me. Good communication and help from Tazu

[Keelodog]

Originally Posted by First_damned

I'm having a new piston complete with new seals sent out to me. Good communication and help from Tazu

Could you let me know if this solves your leak, I too have been experiencing problems with the same leak as yourself

[First_damned]

Originally Posted by Keelodog

Could you let me know if this solves your leak, I too have been experiencing problems with the same leak as yourself

Yes of course I will do. Should hopefully get it next week Tuesday or Wednesday. Off to bed now had a tooth out at the dentist earlier and they had to cut some of the bone away around it so ouch hurts a bit.

[andy willi]

Originally Posted by First_damned

Yes of course I will do. Should hopefully get it next week Tuesday or Wednesday. Off to bed now had a tooth out at the dentist earlier and they had to cut some of the bone away around it so ouch hurts a bit.

hi i can send a new seal to you but as i have not supplied the master there would be a small charge for it please let me know


andy

[andy willi]

just a quick up date on the master cylinders ,

the first batch of cylinders came with the wrong outer seal fitted if yours is one of them i will supply the correct seal and it will be FOC please let me know if you want one .

the masters i have in stock now have the correct seal and have been tested and all is now ok . i have been testing the new master and new metal slave in my own car for weeks now and no problems to report .


as you all can aprisiate this is all still in the very early days of development and up grades will be along when we find them but its better than the throw away plastic ones please keep me updated and i would aprisiate feed back



many thanks

andy

[First_damned]

Originally Posted by andy willi

hi i can send a new seal to you but as i have not supplied the master there would be a small charge for it please let me know


andy

What's the small charge Andy?