|
||
|
||
|
![]() |
#1 |
Al
75 CDTI Tourer Auto Join Date: Mar 2009
Location: Studley
Posts: 1,457
Thanks: 1
Thanked 69 Times in 48 Posts
|
![]() Does it matter if I mix oil in my diesel engine? I've been give 6 one ltr bottles of various viscosity oils. Me thinks at oil change to save buying oil using the oil I have been given.
__________________
ARDVARK |
![]() |
![]() |
![]() |
#2 |
This is my second home
lovely little ford focus. Join Date: Jul 2009
Location: East Dulwich
Posts: 7,877
Thanks: 2
Thanked 82 Times in 68 Posts
|
![]() i wouldnt use it on your car ,i would stick to using the proper oil you have been using ... mixing the oils isnt a good idea,if the oil is too thick bad news ,if the oil is to thin bad news ... keep to the recommended spec for oil and it will keep your car happy....
__________________
[ ![]() |
![]() |
![]() |
![]() |
#3 |
RS South East
Ford fester... blah.... Join Date: Mar 2010
Location: Hastings
Posts: 2,900
Thanks: 29
Thanked 78 Times in 42 Posts
|
![]() I'd have to mostly agree with chrissyboy, best to stick to the recommended grade, wouldnt be concerned about mixing different brands so long as they were the same spec. But.... in the real world it'll probably do no harm! Pretty forgiving engines these....
__________________
|
![]() |
![]() |
![]() |
#4 | |
Loves to post
Rover 75 1.8 saloon. Jag X300 4L, XJ8 3.2 v8, Jeep Grand Cherokee 4l petrol + LPG Join Date: Aug 2011
Location: Newcastle (Upon Toon)
Posts: 487
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Quote:
Basically if you mix 2 oils with different viscosity you end up with something between the 2. i.e. 20-40 + 10-40 = 15-40 ( very basic ) At the end of the day any oil is better than none, having said that, I mean use an oil for the job, engine oil for engines, hydraulic for hydraulics etc, recommended oils are used for giving optimum performance under ideal conditions . Your handbook should give an idea of the range that if favoured. have a look here! http://www.nordicgroup.us/oil.htm. It is informative and quells some myths regarding oils, Good luck |
|
![]() |
![]() |
![]() |
#5 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,663
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
![]() Al,
According to MGR recommendations, they should meet ACEA A3 and B3 spec. Acceptable viscosities are 10W40/50/60. If you're confident that the temperature in Warwickshire isn't going to exceed 35 degrees C you can use 5W30 & 10W30 as well. If your oils are not all one type (i.e. mineral, semi-synthetic, fully synthetic) I would ask the advice of a company like Comma Oils & Chemicals (www.commaoil.com). Simon.
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
![]() |
![]() |
![]() |
#6 |
This is my second home
MG ZT+ 135 Join Date: Jan 2011
Location: Exeter
Posts: 3,626
Thanks: 9
Thanked 42 Times in 26 Posts
|
![]() As long as the grades and spec meet the requirements you can mix all you like.
The diesel can take 0W40 to 10W40 realistically. 10W40 was Rovers incorrect recommendation, something they corrected at the facelift, BMW specified 0W40, 5W30 and 5W40 BMW LL-98 spec (which is A3/B3) for the M47 engine.
__________________
[SIGPIC][/SIGPIC]
|
![]() |
![]() |
![]() |
#7 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
![]() Look after the oil, and the bearing will look after themselves
![]() Don't skimp on oil, & you will be rewarded in the long term. Brian ![]() |
![]() |
![]() |
![]() |
|
|